Best DDR5 RAMs with CL30 in 2026: 15 Picks Ranked by Specs
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Finding the best ddr5 RAMs with CL30 requires looking closely at timing specifications. We compared 15 kits ranked strictly by their published specs. The G.SKILL Trident Z5 Neo 64GB DDR5-6000 CL30 leads because it pairs high 64GB density with fast CL30 timings. All picks are based on specifications published on the listings. This guide helps you decide which kit matches your motherboard platform and capacity needs.
Quick picks
The best fit for you
- You need high-capacity CL30 memory for an AMD build G.SKILL Trident Z5 Neo 64GB DDR5-6000 CL30 It provides 64GB of DDR5-6000 capacity with CL30 latency and an AMD EXPO profile.
- You need low-clearance memory for an Intel system Corsair Vengeance 32GB DDR5-6000 CL30 RAM Its low 0.3-inch height fits under tight coolers while running at 6000MHz CL30 with Intel XMP.
- You want RGB lighting with dual overclocking profiles Corsair Vengeance RGB 32GB 6000MHz CL30 DDR5 It features built-in RGB lighting alongside dual Intel XMP and AMD EXPO overclocking profiles at 6000MHz.
- You want a compact white kit for either platform TEAMGROUP T-Create Expert 32GB DDR5-6000 CL30 The white heat spreader measures 1.26 inches tall and supports both AMD EXPO and Intel XMP profiles.
Our 15 picks
G.SKILL Trident Z5 Neo 64GB DDR5-6000 CL30
Best for: AMD desktop systems needing high-capacity CL30 memory
- CAS Latency
- CL30 (what this guide is about)
- Capacity
- 64GB
- Memory Speed
- 6000MT/s
- Kit Configuration
- 2x32GB
- Form Factor
- 288-pin U-DIMM
- Overclocking Profile
- AMD EXPO
View on Amazon: G.SKILL Trident Z5 Neo 64GB DDR5-6000 CL30 Affiliate link
This G.SKILL Trident Z5 Neo kit provides 64GB of memory across two 32GB 288-pin UDIMM modules. It pairs a 6000MHz frequency with a CAS latency of CL30 at 1.40V. Built with AMD EXPO profiles, it targets modern AMD motherboards, specifically AMD X870, X670, B850, B840, and B650 chipsets. You get high capacity and tight latency for demanding desktop workloads without needing manual timing entry.
Pros
- 64GB total capacity via two matched 32GB modules
- Low CAS latency of CL30 with 6000MT/s transfer speed
- Includes programmed AMD EXPO overclock profile
- Compatible with AMD X870, X670, B850, B840, and B650 platforms
Cons
- Requires 1.40V operating voltage to reach rated profile speeds
- No Intel XMP profile listed in specifications
- Non-ECC design not suited for hardware requiring error correction
Good fit if
- You run an AMD motherboard such as an X870, X670, or B650 model
- You need 64GB of memory with CL30 latency for heavy computing or gaming
- You want one-click memory overclocking via AMD EXPO
Skip if
- You use an Intel-based system requiring native Intel XMP profiles
- You require error-correcting memory for enterprise server hardware
- You only need a standard 32GB kit for basic daily tasks
Verdict: G.SKILL Trident Z5 Neo 64GB DDR5-6000 CL30 pairs high 64GB density with fast CL30 timings tuned specifically for AMD platforms. It delivers reliable high-bandwidth performance for users running AMD 600- and 800-series motherboards.
G.SKILL Ripjaws S5 32GB DDR5-6000 CL30
Best for: Intel systems needing 6000MHz CL30 DDR5 memory
- CAS Latency
- CL30 (what this guide is about)
- Capacity
- 32GB
- Memory Speed
- 6000MT/s
- Kit Configuration
- 2x16GB
- Form Factor
- 288-pin U-DIMM
- Overclocking Profile
- Intel XMP 3.0
View on Amazon: G.SKILL Ripjaws S5 32GB DDR5-6000 CL30 Affiliate link
You get a 32GB dual-channel desktop memory kit operating at 6000MHz with CL30-40-40-96 timings at 1.35V. This Ripjaws S5 kit includes an Intel XMP 3.0 profile tailored for supported Intel motherboards, including Z790 and B760 chipsets. Finished in matte white, it suits you if you need low-latency DDR5 performance for gaming or productivity on compatible Intel platforms without mixing kits.
Pros
- Low CL30 latency with 30-40-40-96 timings
- Pre-configured Intel XMP 3.0 profile
- Operates at 6000MHz at 1.35V
- Matched 32GB dual-channel kit (2x16GB)
Cons
- No AMD EXPO profile listed
- Requires BIOS adjustments to exceed default JEDEC speed
Good fit if
- You use a compatible Intel platform such as Z790, Z690, or B760.
- You want 32GB of DDR5 memory running at 6000MHz CL30.
- You prefer a matte white module finish for your build.
Skip if
- You run an AMD system that relies on AMD EXPO profiles.
- You need more than 32GB of total system memory.
Verdict: G.SKILL Ripjaws S5 32GB DDR5-6000 CL30 provides low-latency memory performance with an Intel XMP 3.0 profile designed for Intel motherboards. It delivers 6000MHz speeds at 1.35V in a clean matte white finish.
G.SKILL Trident Z5 RGB 32GB 6000MHz CL30
Best for: Intel desktop gaming builds wanting CL30 speed
- CAS Latency
- CL30 (what this guide is about)
- Capacity
- 32GB
- Memory Speed
- 6000MT/s
- Kit Configuration
- 2x16GB
- Form Factor
- 288-pin U-DIMM
- Overclocking Profile
- Intel XMP 3.0
View on Amazon: G.SKILL Trident Z5 RGB 32GB 6000MHz CL30 Affiliate link
This G.SKILL Trident Z5 RGB kit delivers 32GB of memory across two 16GB modules, operating at 6000MHz with CL30 latency and 1.35V. It features an Intel XMP 3.0 profile tailored for compatible Intel platforms such as Z790 and B760 motherboards. If you are building an Intel-based desktop gaming system and want tight CL30-40-40-96 timings alongside integrated lighting, this dual-channel configuration gives you targeted high-speed performance.
Pros
- 6000MHz speed with tight CL30 latency (CL30-40-40-96)
- Includes Intel XMP 3.0 overclocking profile
- Standard 1.35V operating voltage
- Integrated RGB lighting with matte black finish
Cons
- Includes Intel XMP profile only, with no native AMD EXPO profile listed
- Non-ECC memory not intended for error-correcting workstation use
Good fit if
- You use an Intel desktop platform such as Z790, Z690, or B760
- You want a 32GB dual-channel DDR5 kit running at 6000MHz with CL30
- You prefer modules equipped with integrated RGB lighting
Skip if
- You run an AMD build and prefer dedicated AMD EXPO profile support
- You need error-correcting ECC RAM for your setup
Verdict: G.SKILL Trident Z5 RGB 32GB DDR5-6000 CL30 provides low-latency memory performance and Intel XMP 3.0 tuning for modern Intel desktop gaming builds.
G.SKILL Trident Z5 RGB 64GB DDR5
Best for: Intel users needing 64GB capacity
- CAS Latency
- CL30 (what this guide is about)
- Capacity
- 64 GB
- Memory Speed
- 6000 MT/s
- Kit Configuration
- 2x32GB
- Form Factor
- U-DIMM
- Overclocking Profile
- Intel XMP 3.0
View on Amazon: G.SKILL Trident Z5 RGB 64GB DDR5 Affiliate link
This G.SKILL kit offers 64GB of DDR5 memory running at 6000MHz with CL30 latency. It uses Intel XMP 3.0 for easy overclocking on supported Z-series motherboards. The black heat spreaders fit most cases. You get a matched pair of 32GB sticks for high capacity. This setup suits users who need more than 32GB for heavy multitasking or content creation.
Pros
- 64GB total capacity (2x32GB)
- 6000MHz speed with CL30 latency
- Intel XMP 3.0 support
- Black aluminum heat spreader
Cons
- Requires Intel Z-series or B-series motherboard
- Only supports Intel XMP profiles
- Higher 1.40V operating voltage
Good fit if
- You need 64GB of system memory
- You use an Intel Z790 or Z890 motherboard
- You run memory-intensive creative applications
Skip if
- You build with AMD processors
- You only need 32GB of RAM
- You require AMD EXPO compatibility
Verdict: G.SKILL Trident Z5 RGB 64GB DDR5 provides high capacity and tight timing for Intel platforms. It fits creators who need extra RAM and fast speeds without mixing kits.
TEAMGROUP T-Force Delta RGB DDR5 32GB 6000MHz
Best for: RGB desktop builds needing low latency
- CAS Latency
- CL30 (what this guide is about)
- Capacity
- 32GB
- Memory Speed
- 6000MHz
- Kit Configuration
- 2x16GB
- Overclocking Profile
- Intel XMP 3.0 & AMD Expo
- ECC Support
- On-die ECC
View on Amazon: TEAMGROUP T-Force Delta RGB DDR5 32GB 6000MHz Affiliate link
This TEAMGROUP T-Force Delta RGB DDR5 kit provides 32GB across two 16GB modules rated at 6000MHz with CL30 timings. It features both Intel XMP 3.0 and AMD EXPO profiles for cross-platform setup. The white heat spreaders measure 1.81 inches tall and include wide-angle RGB lighting. You get on-die ECC and dedicated PMIC cooling, making it a solid fit if you want low-latency memory for an open or liquid-cooled desktop build.
Pros
- Supports both Intel XMP 3.0 and AMD EXPO profiles
- Low CAS latency of CL30 at 6000MHz
- Equipped with on-die ECC and PMIC cooling
- Wide 120-degree RGB illumination
Cons
- Module height of 1.81 inches may block large CPU air coolers
- White heat spreader styling may clash with dark system themes
Good fit if
- You use an AMD or Intel motherboard supporting EXPO or XMP 3.0.
- You prioritize low CL30 latency alongside 6000MHz transfer speeds.
- You have clearance for memory modules measuring 1.81 inches tall.
Skip if
- You require low-profile RAM modules to fit under a large heatsink.
- You prefer an unlit build without integrated RGB lighting.
Verdict: TEAMGROUP T-Force Delta RGB DDR5 32GB 6000MHz pairs fast 6000MHz speed and low CL30 latency with broad platform support. Its 1.81-inch height requires adequate cooler clearance in your system.
G.SKILL Trident Z5 Neo 32GB DDR5-6000
Best for: AMD Ryzen gaming and productivity
- CAS Latency
- CL30 (what this guide is about)
- Capacity
- 32GB
- Memory Speed
- 6000MT/s
- Kit Configuration
- 2x16GB
- Form Factor
- 288-pin U-DIMM
- Overclocking Profile
- AMD EXPO
View on Amazon: G.SKILL Trident Z5 Neo 32GB DDR5-6000 Affiliate link
This G.SKILL kit offers 32GB of DDR5 memory running at 6000MHz with a tight CAS Latency of CL30. It uses AMD EXPO profiles for easy overclocking on compatible platforms. The matte black heat spreader provides a clean look. You get matched pairs for stability. This setup suits gamers and creators using AMD Ryzen systems who want high speed without complex tuning.
Pros
- 6000MHz memory speed
- CL30 CAS Latency
- AMD EXPO support
- 1.35V operating voltage
Cons
- Limited to AMD EXPO profiles
- 32GB total capacity
Good fit if
- You use an AMD Ryzen motherboard
- You need CL30 latency for gaming
- You want a matte black look
Skip if
- You require Intel XMP 3.0 support
- You need 64GB of RAM
- You prefer RGB lighting
Verdict: G.SKILL Trident Z5 Neo 32GB DDR5-6000 is a solid choice for AMD builders seeking low latency. It delivers reliable performance for gaming and content creation on compatible motherboards.
G.SKILL Ripjaws S5 32GB DDR5 CL30
Best for: Intel desktops needing low latency
- CAS Latency
- CL30 (what this guide is about)
- Capacity
- 32GB
- Memory Speed
- 6000MT/s
- Kit Configuration
- 2x16GB
- Form Factor
- 288-pin U-DIMM
- Overclocking Profile
- Intel XMP 3.0
View on Amazon: G.SKILL Ripjaws S5 32GB DDR5 CL30 Affiliate link
This G.SKILL Ripjaws S5 kit offers 32GB of DDR5 memory running at 6000MHz with a tight CL30 latency. It uses Intel XMP 3.0 for easy overclocking on compatible Z790 or Z690 motherboards. The matte black heat spreader keeps the profile low at 0.62 inches. You get a balanced speed and timing combination suitable for Intel-based desktop builds.
Pros
- 6000MHz speed with CL30 latency
- Intel XMP 3.0 profile support
- Low 0.62-inch height for compatibility
- 1.35V operating voltage
Cons
- 32GB capacity is smaller than 64GB kits on this list
- Intel XMP only, lacking AMD EXPO support
- Heavier at 4.64 ounces compared to lighter kits
Good fit if
- You are building an Intel desktop with Z790 or Z690
- You need 6000MHz speed with low CL30 latency
- You prefer a low-profile matte black design
Skip if
- You use an AMD processor requiring EXPO
- You need more than 32GB of total memory
- You want RGB lighting features
Verdict: G.SKILL Ripjaws S5 32GB DDR5 CL30 is a solid choice for Intel users who prioritize low latency and a compact profile over higher capacity or RGB aesthetics. It fits well in standard ATX cases with mid-sized coolers.
Corsair Vengeance RGB 32GB 6000MHz CL30 DDR5
Best for: dual-platform AMD and Intel RGB desktop builds
- CAS Latency
- CL30 (what this guide is about)
- Capacity
- 32GB
- Memory Speed
- 6000MHz
- Kit Configuration
- 2x16GB
- Overclocking Profile
- AMD EXPO, Intel XMP
- Voltage
- 1.40V
View on Amazon: Corsair Vengeance RGB 32GB 6000MHz CL30 DDR5 Affiliate link
This Corsair memory kit provides 32GB across two 16GB modules running at 6000MHz with CL30-36-36-76 timings at 1.40V. It supports both AMD EXPO and Intel XMP overclocking profiles for cross-platform compatibility. Each stick features a panoramic ten-zone addressable RGB light bar and onboard voltage regulation managed by software. It suits you if you want tight CL30 response times with customizable multi-zone lighting on either AMD or Intel desktop builds.
Pros
- Supports both AMD EXPO and Intel XMP overclocking profiles
- Low CL30-36-36-76 timings at 6000MHz frequency
- Ten individually addressable RGB LEDs per module
- Onboard voltage regulation enabled via desktop software
Cons
- Requires 1.40V operating voltage to hit rated speeds
- Module height of 1.77 inches may conflict with large air coolers
Good fit if
- You switch between or build with AMD EXPO or Intel XMP platforms.
- You want ten-zone addressable RGB lighting on your memory sticks.
- You need 32GB of dual-channel capacity operating at CL30 latency.
Skip if
- You use a compact CPU cooler that requires modules shorter than 1.77 inches.
- You prefer low-profile memory without integrated RGB lighting.
Verdict: Corsair Vengeance RGB 32GB DDR5 6000MHz CL30 delivers tight CL30 timings alongside versatile dual-profile EXPO and XMP support. It provides balanced high-frequency performance and vivid addressable illumination for mainstream desktop motherboards.
Corsair Vengeance 32GB DDR5-6000 CL30 RAM
Best for: Compact Intel builds without RGB needs
- CAS Latency
- CL30 (what this guide is about)
- Capacity
- 32GB
- Memory Speed
- 6000MHz
- Kit Configuration
- 2x16GB
- Overclocking Profile
- Intel XMP 3.0
- Voltage
- 1.40V
View on Amazon: Corsair Vengeance 32GB DDR5-6000 CL30 RAM Affiliate link
This Corsair Vengeance kit delivers 32GB of DDR5 memory running at 6000MHz with CL30 latency. It uses Intel XMP 3.0 for straightforward setup on compatible motherboards. The low-profile black heatsink fits well in compact builds. You get onboard voltage regulation for stable performance. This kit suits desktop users who prioritize a clean look and reliable speeds without extra bulk.
Pros
- 6000MHz speed with CL30 timing
- Intel XMP 3.0 profile support
- Compact low-profile heatsink design
- Onboard voltage regulation for stability
Cons
- Intel XMP only, no AMD EXPO
- No RGB lighting included
- Higher 1.40V operating voltage
Good fit if
- You need a low-profile kit for tight cases
- You use an Intel platform with XMP 3.0
- You prefer a simple black aesthetic
Skip if
- You use an AMD motherboard requiring EXPO
- You want customizable RGB lighting effects
- You require lower voltage operation
Verdict: Corsair Vengeance DDR5 32GB 6000MHz CL30 is a solid choice for Intel users seeking a compact, non-RGB memory kit with stable voltage regulation.
G.SKILL Trident Z5 Neo RGB 32GB DDR5-6000 CL30
Best for: dual-platform builds needing CL30 RGB memory
- CAS Latency
- CL30 (what this guide is about)
- Capacity
- 32GB
- Memory Speed
- 6000MT/s
- Kit Configuration
- 2x16GB
- Form Factor
- 288-pin U-DIMM
- Overclocking Profile
- AMD EXPO & Intel XMP 3.0
View on Amazon: G.SKILL Trident Z5 Neo RGB 32GB DDR5-6000 CL30 Affiliate link
This G.SKILL Trident Z5 Neo RGB kit provides 32GB of DDR5 memory using two 16GB UDIMM modules. It features CL30 CAS latency, 6000MT/s transfer speed, and runs at 1.35V. It carries both AMD EXPO and Intel XMP 3.0 overclocking profiles, making it easy to configure across platforms. It suits you if you want low-latency DDR5 with integrated RGB lighting and multi-platform overclocking support for your desktop build.
Pros
- Includes both AMD EXPO and Intel XMP 3.0 profiles
- Low CAS latency of CL30 at 6000MT/s
- Operates at a rated 1.35V
- Matte black heatspreader with integrated RGB lighting
Cons
- Requires manual BIOS profile activation to reach rated 6000MT/s speed
- Non-ECC design not intended for workstation-grade error checking
Good fit if
- You want a 32GB DDR5 kit supporting both AMD EXPO and Intel XMP 3.0
- You need tight CL30 latency at 6000MT/s
- You want integrated RGB lighting on matte black UDIMM modules
Skip if
- You need ECC memory for specialized workstations
- You require a capacity larger than 32GB
Verdict: G.SKILL Trident Z5 Neo RGB 32GB DDR5-6000 CL30 delivers 6000MT/s performance paired with flexible dual-profile overclocking support. It is a practical, low-latency memory solution for standard desktop PC platforms.
TEAMGROUP T-Create Expert 32GB DDR5-6000 CL30
Best for: compact white desktop builds needing cooler clearance
- CAS Latency
- CL30 (what this guide is about)
- Capacity
- 32GB
- Memory Speed
- 6000MHz
- Kit Configuration
- 2 x 16GB
- Overclocking Profile
- Intel XMP 3.0 & AMD EXPO
- Compatible Device
- Desktop
View on Amazon: TEAMGROUP T-Create Expert 32GB DDR5-6000 CL30 Affiliate link
The TEAMGROUP T-Create Expert 32GB DDR5-6000 CL30 is a dual-channel memory kit built for desktop systems. It provides 32GB of capacity across two 16GB UDIMM modules running at 6000MHz with CL30 latency. The modules support both Intel XMP and AMD EXPO overclocking profiles for broad motherboard compatibility. Standing at 1.26 inches tall with a white finish, this low-profile kit suits builders who need clearance under large CPU air coolers.
Pros
- Supports both Intel XMP and AMD EXPO overclocking profiles
- Low module height of 1.26 inches for cooler clearance
- Runs at 6000MHz with low CL30 CAS latency
- Configured as a dual-channel 32GB kit using two 16GB modules
Cons
- No integrated RGB lighting
- Limited to 32GB total capacity in this configuration
Good fit if
- You need low-clearance memory measuring 1.26 inches tall to fit under large CPU coolers.
- You want support for both Intel XMP and AMD EXPO overclocking profiles.
- You prefer a clean white aesthetic for your desktop build.
Skip if
- You need 64GB or higher total system memory for demanding production workloads.
- You want customizable RGB lighting integrated into your RAM modules.
Verdict: TEAMGROUP T-Create Expert 32GB DDR5-6000 CL30 delivers low CL30 latency and dual AMD EXPO and Intel XMP profile support in a compact 1.26-inch form factor. It provides clean white styling and reliable clearance for tight desktop setups.
TEAMGROUP T-Force Vulcan 32GB DDR5-6000 CL30
Best for: low-clearance systems needing dual overclocking profiles
- CAS Latency
- CL30 (what this guide is about)
- Capacity
- 32GB
- Memory Speed
- 6000MHz
- Kit Configuration
- 2x16GB
- Overclocking Profile
- Intel XMP 3.0, AMD EXPO
- ECC Support
- On-die ECC
View on Amazon: TEAMGROUP T-Force Vulcan 32GB DDR5-6000 CL30 Affiliate link
This kit delivers 32GB of memory across two 16GB modules, operating at 6000MHz with a CAS latency of CL30. It supports both Intel XMP 3.0 and AMD EXPO overclocking profiles for straightforward setup on compatible desktop systems. At roughly 1.29 inches tall with on-die ECC and PMIC cooling, it works well if you need low-latency speed in builds with restricted cooler clearance.
Pros
- Low CAS latency rating of CL30 at 6000MHz
- Supports both Intel XMP 3.0 and AMD EXPO profiles
- Compact module height of roughly 1.29 inches
- Equipped with on-die ECC and PMIC cooling
Cons
- No integrated RGB lighting listed
- Total kit capacity limited to 32GB
Good fit if
- You need a low-profile CL30 kit that fits under large CPU air coolers.
- You want support for both Intel XMP and AMD EXPO memory profiles.
Skip if
- You want RGB lighting elements on your RAM modules.
- You require a 64GB capacity kit for your workload.
Verdict: TEAMGROUP T-Force Vulcan 32GB DDR5-6000 CL30 provides tight CL30 timings and dual Intel XMP and AMD EXPO support in a low-profile format. Its sub-1.3-inch height makes it a reliable choice for setups with strict cooler clearance.
Corsair Vengeance 32GB 6000MHz DDR5 Kit
Best for: Compact builds needing stable DDR5 performance
- CAS Latency
- CL30 (what this guide is about)
- Capacity
- 32GB
- Memory Speed
- Up to 6000MHz
- Kit Configuration
- 2 x 16GB
- Overclocking Profile
- AMD EXPO & Intel XMP 3.0
- Compatible Device
- Desktop
View on Amazon: Corsair Vengeance 32GB 6000MHz DDR5 Kit Affiliate link
This Corsair Vengeance kit offers 32GB of DDR5 memory in a 2x16GB configuration. It supports speeds up to 6000MHz with a tight CAS Latency of CL30. The module features onboard voltage regulation for stable overclocking and works with both AMD EXPO and Intel XMP 3.0 profiles. Its compact gray heat spreader measures 1.4 inches in height. You get tightly screened chips for reliable performance on modern desktop platforms.
Pros
- Dual support for AMD EXPO and Intel XMP 3.0 profiles
- Onboard voltage regulation for stable overclocking
- Tightly screened memory chips for extended potential
- Compact 1.4-inch height fits most cases
Cons
- 32GB capacity is lower than the 64GB options available from competitors
- 6000MHz speed is standard compared to higher overclocking limits on other kits
- No RGB lighting included in this specific model
Good fit if
- You need a low-profile kit for compact builds
- You want a single kit that works with AMD or Intel platforms
- You prefer stable voltage regulation over flashy aesthetics
Skip if
- You require 64GB of memory for heavy multitasking
- You want RGB lighting for your build aesthetic
- You need speeds significantly higher than 6000MHz
Verdict: Corsair Vengeance DDR5 32GB CL30 provides a balanced, low-profile memory solution for users who value stability and cross-platform compatibility over high-capacity or aesthetic features.
KLEVV Bolt V 32GB DDR5-6000 CL30
Best for: low-clearance setups needing 6000MHz CL30 performance
- CAS Latency
- CL30 (what this guide is about)
- Capacity
- 32GB
- Memory Speed
- 6000MHz
- Kit Configuration
- 2x16GB
- Overclocking Profile
- Intel XMP 3.0, AMD EXPO
- Voltage
- 1.35V
View on Amazon: KLEVV Bolt V 32GB DDR5-6000 CL30 Affiliate link
This KLEVV Bolt V kit gives you 32GB of DDR5 memory across two 16GB modules running at 6000MHz with CL30 latency. Operating at 1.35V, it supports both Intel XMP 3.0 and AMD EXPO overclocking profiles. The aluminum heat spreader has a 34 mm low-profile height for tight cooler clearance. It suits you if you need low CAS latency memory for compact desktop builds.
Pros
- Low CAS latency of CL30 at 6000MHz speed
- Dual profile support for Intel XMP 3.0 and AMD EXPO
- Compact 34 mm heat spreader height fits under large coolers
- Uses SK Hynix A-Die memory chips at 1.35V
Cons
- No RGB lighting included
- Capacity limited to 32GB in this kit configuration
Good fit if
- You need a low-profile 34 mm height to fit under bulky CPU air coolers.
- You want dual Intel XMP 3.0 and AMD EXPO profile support at 6000MHz CL30.
Skip if
- You want integrated RGB lighting on your memory modules.
- You need a higher capacity kit such as 64GB.
Verdict: KLEVV Bolt V 32GB DDR5-6000 CL30 delivers tight CL30 timings at 6000MHz within a compact 34 mm heat spreader. It offers straightforward AMD EXPO and Intel XMP 3.0 compatibility for small or low-clearance desktop setups.
G.SKILL Flare X5 64GB DDR5-6000 CL30
Best for: AMD builds needing 64GB low-latency memory
- CAS Latency
- CL30 (what this guide is about)
- Capacity
- 64GB
- Memory Speed
- 6000MT/s
- Kit Configuration
- 2x32GB
- Form Factor
- 288-pin U-DIMM
- Overclocking Profile
- AMD EXPO
View on Amazon: G.SKILL Flare X5 64GB DDR5-6000 CL30 Affiliate link
This 64GB desktop memory kit includes two 32GB DDR5 modules running at 6000MHz. It features a CAS latency of CL30 with timings rated at 30-40-40-96 and operates at 1.40V. Built with an AMD EXPO profile, it targets compatible AMD motherboards using X870, X670, B850, B840, or B650 platforms. You get high memory capacity and responsive latency in a matte black finish without lighting.
Pros
- 64GB capacity via two matched 32GB DDR5 modules
- Low CAS latency of CL30 at 6000MHz
- Preconfigured AMD EXPO overclocking profile
- Validated for AMD X870, X670, B850, B840, and B650 platforms
Cons
- No Intel XMP profile listed in specifications
- Requires 1.40V operating voltage for rated profile
- Lacks integrated RGB illumination
Good fit if
- You run an AMD motherboard with an X870, X670, B850, B840, or B650 chipset.
- You want 64GB of system memory with low CL30 latency.
- You prefer a non-RGB matte black design.
Skip if
- You need Intel XMP support for an Intel-based configuration.
- You want customizable RGB lighting on your RAM modules.
Verdict: G.SKILL Flare X5 64GB DDR5-6000 CL30 delivers high capacity and low CL30 latency optimized for supported AMD motherboards via AMD EXPO. It provides a straightforward matte black aesthetic for builds that do not need RGB lighting.
Specifications side by side
| Spec | G.SKILL Trident Z5 Neo 64GB DDR5-6000 CL30 | G.SKILL Ripjaws S5 32GB DDR5-6000 CL30 | G.SKILL Trident Z5 RGB 32GB 6000MHz CL30 | G.SKILL Trident Z5 RGB 64GB DDR5 | TEAMGROUP T-Force Delta RGB DDR5 32GB 6000MHz | G.SKILL Trident Z5 Neo 32GB DDR5-6000 | G.SKILL Ripjaws S5 32GB DDR5 CL30 | Corsair Vengeance RGB 32GB 6000MHz CL30 DDR5 | Corsair Vengeance 32GB DDR5-6000 CL30 RAM | G.SKILL Trident Z5 Neo RGB 32GB DDR5-6000 CL30 | TEAMGROUP T-Create Expert 32GB DDR5-6000 CL30 | TEAMGROUP T-Force Vulcan 32GB DDR5-6000 CL30 | Corsair Vengeance 32GB 6000MHz DDR5 Kit | KLEVV Bolt V 32GB DDR5-6000 CL30 | G.SKILL Flare X5 64GB DDR5-6000 CL30 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity | 64GB | 32GB | 32GB | 64 GB | 32GB | 32GB | 32GB | 32GB | 32GB | 32GB | 32GB | 32GB | 32GB | 32GB | 64GB |
| Memory Speed | 6000MT/s | 6000MT/s | 6000MT/s | 6000 MT/s | 6000MHz | 6000MT/s | 6000MT/s | 6000MHz | 6000MHz | 6000MT/s | 6000MHz | 6000MHz | Up to 6000MHz | 6000MHz | 6000MT/s |
| CAS Latency | CL30-40-40-96 | CL30 | CL30 | CL30 | CL30 | CL30 | CL30 | CL30 | CL30 | CL30 | CL30 | CL30 | CL30 | CL30 | CL30 |
| Kit Configuration | 2x32GB | 2x16GB | 2x16GB | 2x32GB | 2x16GB | 2x16GB | 2x16GB | 2x16GB | 2x16GB | 2x16GB | 2 x 16GB | 2x16GB | 2 x 16GB | 2x16GB | 2x32GB |
| Form Factor | 288-pin U-DIMM | 288-pin U-DIMM | 288-pin U-DIMM | U-DIMM | not stated | 288-pin U-DIMM | 288-pin U-DIMM | not stated | not stated | 288-pin U-DIMM | not stated | not stated | not stated | not stated | 288-pin U-DIMM |
| Overclocking Profile | AMD EXPO | Intel XMP 3.0 | Intel XMP 3.0 | Intel XMP 3.0 | Intel XMP 3.0 & AMD Expo | AMD EXPO | Intel XMP 3.0 | AMD EXPO, Intel XMP | Intel XMP 3.0 | AMD EXPO & Intel XMP 3.0 | Intel XMP 3.0 & AMD EXPO | Intel XMP 3.0, AMD EXPO | AMD EXPO & Intel XMP 3.0 | Intel XMP 3.0, AMD EXPO | AMD EXPO |
| Voltage | 1.40V | 1.35V | 1.35V | 1.40V | not stated | 1.35V | 1.35V | 1.40V | 1.40V | 1.35V | not stated | not stated | not stated | 1.35V | 1.40V |
| ECC Support | Non-ECC | Non-ECC | Non-ECC | Non-ECC | On-die ECC | Non-ECC | Non-ECC | not stated | not stated | Non-ECC | not stated | On-die ECC | not stated | not stated | Non-ECC |
| Compatible Device | Desktop, PC | Desktop, PC | Desktop, PC | Desktop, PC | Desktop | Desktop, PC | Desktop, PC | Desktop, PC | Desktop, PC | Desktop, PC | Desktop | Desktop | Desktop | Desktop | Desktop, PC |
| Size | 64GB | 32GB (2x16GB) | 32GB (2x16GB) | 64GB | 32GB(2x16GB) | 32GB (2x16GB) | 32GB | 32GB (2 x 16GB) | 32GB (2x16GB) | 32GB | 32GB (16GBx2) | 32GB (2x16GB) | 32GB (2 x 16GB) | 32GB (2 x 16GB) | 64GB (2x32GB) |
| Dimensions | 6.3 × 5.51 × 0.39 inches | not stated | not stated | 1.1 × 9.7 × 6.5 inches | 5.68 × 0.28 × 1.81 inches | 1.1 × 9.7 × 6.5 inches | 8.5 × 5.5 × 0.62 inches | 5.43 × 0.27 × 1.77 inches | 5.3 × 1.4 × 0.3 inches | 6.3 × 5.4 × 0.59 inches | 5.24 × 0.28 × 1.26 inches | 5.51 × 0.3 × 1.29 inches | 5.29 × 1.4 × 0.3 inches | 5.24 × 0.28 × 2.36 inches | 5.91 × 4.8 × 0.63 inches |
| Weight | 6.35 ounces | not stated | not stated | 6 ounces | 1.76 ounces | 0.71 ounces | 4.64 ounces | 1.76 ounces | 1.31 ounces | 5.92 ounces | not stated | not stated | 1.31 ounces | not stated | 2.54 ounces |
| Color | Black | Matte White | Matte black | Black | White | Matte Black | Matte Black | Gray | Black | Matte Black | White-UDIMM | Red | Gray | Black | Matte Black |
| Model | F5-6000J3040G32GX2-TZ5N | F5-6000J3040F16GA2-RS5W | F5-6000J3040F16GA2-TZ5RK | F5-6000J3040G32GX2-TZ5RK | FF4D532G6000HC30DC01 | F5-6000J3038F16GX2-TZ5NR | F5-6000J3040F16GX2-RS5K | CMH32GX5M2B6000Z30K | CMK32GX5M2B6000C30 | F5-6000J3038F16GX2-TZ5NR | CTCWD532G6000HC30DC01 | FLRD532G6000HC30DC01 | CMK32GX5M2B6000Z30 | not stated | F5-6000J3040G32GX2-FX5 |
Is CL30 Worth It for Your DDR5 Desktop Build?
CAS latency indicates the delay in clock cycles before memory executes read commands. A CL30 rating paired with 6000MHz DDR5 provides lower cycle delays than higher-latency alternatives. Published specifications demonstrate that these kits operate at 1.35V to maintain tight timings across standard desktop PCs. This timing profile delivers faster memory response times when paired with AMD EXPO or Intel XMP systems. If you prioritize minimal latency for gaming setups or high-bandwidth desktop workflows, selecting a CL30 kit provides the fastest baseline timing profile available across these 15 6000MHz UDIMM modules.
Worth it if
- You run gaming or desktop workloads that benefit directly from 6000MHz frequencies with tight CL30 timings.
- You use an AMD EXPO or Intel XMP motherboard capable of running memory at 1.35V.
Skip it if
- You build a system that only supports standard DDR5 baseline speeds without overclocking profiles.
- You use non-desktop devices or motherboards requiring form factors other than standard desktop UDIMMs.
To reach rated memory speeds and maintain low latency, you must pair these modules with a compatible DDR5 motherboard.
How we chose CL30 RAM
You find memory kits in this guide by checking published specifications and listings for DDR5 RAM featuring CL30 CAS latency. Every model is identified strictly from published spec sheets without physical handling. To avoid repetition, you see only one capacity or styling variant from each product family.
For the 15 recommendations in 2026, listings are ordered with products in stock first, then by Amazon sales rank (better-selling products first). You can evaluate remaining published specifications, such as 6000MHz frequency, kit height, and Intel XMP or AMD EXPO profile support, to find the right match for your desktop build.
How to Choose the Right DDR5 RAM
-
Choose Between 32GB and 64GB
You should verify the memory capacity your desktop workload demands before buying. Most kits on this list provide 32GB using two 16GB modules, which handles standard multitasking and modern gaming workloads. If you run intensive production applications or heavy background tasks, you should opt for a 64GB configuration instead. For example, the G.SKILL Flare X5 64GB DDR5-6000 CL30 provides 64GB across two 32GB UDIMMs. Selecting the correct density upfront prevents the need to replace your memory kit later.
-
Check Heat Spreader Height
You must check module height to avoid physical conflicts with your CPU air cooler. Large heatsinks often overhang the memory slots on desktop motherboards, restricting vertical space. Low-profile memory sticks provide reliable clearance for tight chassis installations and bulky dual-tower coolers. For example, TEAMGROUP T-Create Expert 32GB DDR5-6000 CL30 features a compact height of 1.26 inches, whereas taller RGB heat spreaders can reach 1.81 inches. Measure the clearance under your cooler fan before choosing your memory module height.
-
Confirm Desktop UDIMM Support
You must confirm your motherboard uses standard UDIMM slots before selecting a DDR5 kit. All models listed here use the desktop UDIMM form factor, which is engineered specifically for full-sized desktop systems and standard PC motherboards. They will not fit into laptops, compact notebooks, or small devices requiring SODIMM memory. The G.SKILL Trident Z5 Neo 64GB DDR5-6000 CL30 lists UDIMM form factor support explicitly for desktop PCs. Verify that your system chassis and motherboard layout accept standard desktop memory modules before buying.
-
Match Heat Spreader Color
You can coordinate your memory with your build palette by checking the published heat spreader color. These kits come in distinct exterior finishes, including Matte Black, Black, White, Matte White, Gray, and Red. Selecting a matching color ensures clean visual cohesion inside windowed desktop cases without impacting transfer speeds or timings. For example, G.SKILL Ripjaws S5 32GB DDR5-6000 CL30 provides a Matte White finish designed to complement lighter computer components. Review your motherboard and case aesthetic before deciding which color option to purchase.
-
Review Module Length Specs
You should verify the module length specifications if your PC build features limited motherboard clearance or tightly packed components. Memory sticks on this list vary in overall length depending on the design of the integrated heat spreaders. Compact models measure around 5.24 inches, while extended heat spreaders can span up to 6.3 inches. For example, TEAMGROUP T-Force Vulcan 32GB DDR5-6000 CL30 measures 5.51 inches in length and 0.3 inches in width. Confirm that your motherboard DIMM slot area has unobstructed horizontal space for your chosen modules.
Frequently asked questions
Does DDR5 CL30 memory fit under large CPU air coolers?
Yes, but you must verify the specific physical height of each memory stick. While compact modules like the Corsair Vengeance measure just 0.3 inches tall and TEAMGROUP T-Create Expert measures 1.26 inches, taller options like TEAMGROUP T-Force Delta RGB reach over 1.81 inches. Checking heat spreader height ensures your chosen kit will not conflict with wide heatsinks or low-hanging cooling fans.
Do you need to enable a profile to run DDR5 RAM at 6000MHz CL30?
Yes, you must activate the specified overclocking profile in your motherboard BIOS. DDR5 memory defaults to base JEDEC parameters until you manually select the embedded Intel XMP or AMD EXPO setting. Kits such as the G.SKILL Flare X5 or G.SKILL Ripjaws S5 store their tuned 6000MHz frequency and CL30 timings directly on the modules, enabling rated speeds with one toggle.
Can DDR5 CL30 memory kits support both AMD and Intel platforms?
Yes, certain DDR5 CL30 kits feature dual profile compatibility for both platforms. Modules like the Acer Predator Pallas II, Corsair Vengeance RGB, and TEAMGROUP T-Force Vulcan carry both Intel XMP and AMD EXPO specifications. This dual certification allows you to load tested 6000MHz CL30 profiles whether your desktop system uses an Intel or AMD motherboard.
What operating voltage do 6000MHz CL30 DDR5 modules require?
Most 6000MHz CL30 memory kits operate at a specified voltage of 1.35V. Published specifications for models like the G.SKILL Trident Z5 Neo, Ripjaws S5, and KLEVV Bolt V confirm this 1.35V rating. When you apply the XMP or EXPO profile, your motherboard automatically sets the memory controller to provide this power level for stable operation.
Can you install DDR5 CL30 UDIMM modules into laptops?
No, these DDR5 CL30 kits use the desktop UDIMM form factor. Desktop UDIMM modules feature full-sized boards intended for standard desktop and PC motherboards. Laptops require smaller SODIMM form factors, which have completely different pin configurations and physical dimensions. Always verify your device type before selecting memory, ensuring your PC motherboard has standard desktop DDR5 slots.
How are 32GB and 64GB DDR5 CL30 kits packaged?
DDR5 CL30 memory kits are packaged as dual-channel pairs of matched sticks. A 32GB capacity typically ships as two 16GB modules, as seen with the KLEVV Bolt V and G.SKILL Ripjaws S5. The 64GB configurations, such as the G.SKILL Flare X5, provide two 32GB modules. Installing two matched modules enables dual-channel memory bandwidth on compatible motherboards.
Do RGB lighting diffusers change the dimensions of DDR5 CL30 RAM?
Yes, RGB illumination hardware adds physical height and thickness to the memory modules. For example, the illuminated Corsair Vengeance RGB stands 1.77 inches tall, whereas the non-RGB Corsair Vengeance measures only 0.3 inches high. If you choose RGB options like the G.SKILL Trident Z5 Neo RGB, account for the larger profile when arranging nearby CPU cooling components.














