13 Best G.SKILL DDR4 RAMS Under $150, Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You need the best G.SKILL DDR4 RAMs under $150 for your current build. We compared 13 kits using only the specifications published on their listings. The G.SKILL Trident Z RGB 16GB DDR4 RAM Kit leads the list. Its 3000MHz speed and CL16 latency make it ideal for desktop builds needing 16GB RGB dual-channel memory. This guide helps you decide which kit matches your system’s requirements. You can choose between UDIMM and SO-DIMM modules based on your device type. We focus on speed, latency, and capacity to ensure you select the right memory.
Quick picks
The best fit for you
- You need RGB lighting for your desktop build G.SKILL Trident Z RGB 16GB DDR4 RAM Kit This kit features integrated RGB lighting with 3000MHz speed and CL16 latency.
- You want the lowest latency on the list G.SKILL RipjawsV 8GB 2400MHz Red It offers CL15 latency at 2400MHz, providing the tightest timings in this group.
- You are upgrading a laptop with standard speed G.SKILL Ripjaws DDR4 SO-DIMM 16GB 2400MHz This SO-DIMM kit provides 2400MHz performance for portable computers needing reliable upgrades.
- You need low-latency 3600MT/s memory G.SKILL Ripjaws V 16GB DDR4-3600 CL16 RAM Kit It delivers 3600MT/s speed with tight CL16 timings for high-performance desktop systems.
- You want a single stick for future expansion G.SKILL Ripjaws V 16GB DDR4 3200MHz UDIMM This single 16GB module runs at 3200MHz, leaving other DIMM slots open.
Our 13 picks
G.SKILL Trident Z RGB 16GB DDR4 RAM Kit
Best for: desktop builds needing 16GB RGB dual-channel memory
- Total Capacity
- 16GB
- Memory Speed
- 3000MT/s
- CAS Latency
- CL16
- Voltage
- 1.35V
- Module Configuration
- 2x8GB
- Form Factor
- U-DIMM
View on Amazon: G.SKILL Trident Z RGB 16GB DDR4 RAM Kit Affiliate link
This dual-channel kit includes two 8GB DDR4 modules for desktop systems. It operates at 3000MT/s with CL16 latency at 1.35V using an Intel XMP profile. You get integrated RGB lighting across heat spreaders measuring 1.7 inches tall. It suits your build if you want dual-channel 16GB memory with standard DDR4 timings and multicolor styling.
Pros
- Intel XMP profile for one-step setup at 3000MT/s
- Dual-channel kit with two matched 8GB modules
- Tested latency timings of CL16-18-18-38 at 1.35V
- Integrated multicolor RGB light bar
Cons
- Lower 3000MT/s speed rating than 3200MT/s and 3600MT/s options
- Module height of 1.7 inches may conflict with low CPU air coolers
Good fit if
- You need a matched 16GB dual-channel DDR4 kit for a desktop PC.
- You want multicolor RGB lighting on your RAM modules.
- Your motherboard and processor support 3000MT/s using Intel XMP.
Skip if
- You require faster memory speeds such as 3200MT/s or 3600MT/s.
- You need low-profile modules under 1.7 inches for tight cooler clearance.
Verdict: G.SKILL Trident Z RGB 16GB DDR4 RAM provides a dual-channel 3000MT/s configuration with CL16 latency for desktop builders who want integrated RGB lighting.
G.SKILL RipjawsV 8GB 2400MHz Red
Best for: Low-latency upgrades for older desktops
- Total Capacity
- 8GB
- Memory Speed
- 2400MT/s
- CAS Latency
- CL15
- Voltage
- 1.20V
- Module Configuration
- 2x4GB
- Form Factor
- U-DIMM
View on Amazon: G.SKILL RipjawsV 8GB 2400MHz Red Affiliate link
This G.SKILL RipjawsV kit provides 8GB of DDR4 memory in a 2x4GB configuration. It operates at up to 2400MT/s with a tight CL15 latency. The red heatsink fits most desktop builds. You get Intel XMP support for easy overclocking. This kit suits users needing reliable, low-latency memory for standard desktop PCs or upgrading older systems.
Pros
- Tight CL15 latency for responsive performance
- Intel XMP profile for easy speed boosts
- Compact 5.4-inch length fits small cases
- 1.20V operation for efficient power use
Cons
- Lower 2400MT/s speed compared to 3000+ MT/s options
- Only 8GB total capacity, limiting multitasking
- Single stick capacity of 4GB is small
Good fit if
- You need low latency for specific gaming titles
- You are upgrading a system with 2400MHz support
- You require a compact red heatsink for visibility
Skip if
- You need 16GB or more for heavy multitasking
- You want speeds above 3000MT/s
- You are building a modern high-end gaming PC
Verdict: G.SKILL RipjawsV 8GB DDR4 CL15 is a budget-friendly option for users who prioritize low latency over high bandwidth. It fits well in systems where 8GB is sufficient and the motherboard supports 2400MHz speeds.
G.SKILL Ripjaws V 16GB (2x8GB) 3200MHz DDR4 RAM
Best for: Mainstream 16GB dual-channel desktop gaming builds
- Total Capacity
- 16GB
- Memory Speed
- 3200MT/s
- CAS Latency
- CL16
- Voltage
- 1.35V
- Module Configuration
- 2x8GB
- Form Factor
- U-DIMM
View on Amazon: G.SKILL Ripjaws V 16GB (2x8GB) 3200MHz DDR4 RAM Affiliate link
This desktop kit provides two 8GB DDR4 modules for a dual-channel 16GB setup. You get a rated speed of 3200MT/s with CL16-18-18-38 timings at 1.35V. It includes an Intel XMP profile for direct BIOS overclocking alongside standard JEDEC settings. It suits you if you need straightforward memory performance for standard desktop tasks without extra lighting.
Pros
- Dual-channel 16GB setup split into two 8GB modules
- Tested speed up to 3200MT/s with CL16-18-18-38 timings
- Intel XMP profile included for simple BIOS speed configuration
- Standard 288-pin U-DIMM desktop form factor
Cons
- Transfer speed of 3200MT/s trails the 3600MT/s models on this list
- Requires manual BIOS configuration to reach the rated 3200MT/s speed
- Non-ECC design lacks workstation error correction
Good fit if
- You want a dual-channel 16GB layout split across two slots.
- You have a desktop motherboard that supports 3200MT/s DDR4 memory.
- You plan to enable Intel XMP profiles in your system BIOS.
Skip if
- You require 3600MT/s speeds for memory-bandwidth-sensitive workloads.
- You need ECC memory for dedicated workstation stability.
- You prefer a single 16GB module to leave more memory slots open.
Verdict: G.SKILL Ripjaws V 16GB (2x8GB) 3200MT/s RAM provides a balanced dual-stick configuration for desktop builders seeking standard 3200MT/s CL16 performance. It delivers exact XMP profile support for mainstream gaming and productivity setups.
G.SKILL Ripjaws V 16GB DDR4 3200MHz UDIMM
Best for: single-slot desktop upgrades needing expansion headroom
- Total Capacity
- 16GB
- Memory Speed
- 3200MT/s
- CAS Latency
- CL16
- Voltage
- 1.35V
- Module Configuration
- 1x16GB
- Form Factor
- U-DIMM
View on Amazon: G.SKILL Ripjaws V 16GB DDR4 3200MHz UDIMM Affiliate link
This G.SKILL Ripjaws V module gives you 16GB of desktop memory on a single 288-pin U-DIMM stick. It operates at 3200MT/s with CL16 latency at 1.35V using an Intel XMP profile. Running a single module leaves extra motherboard slots open for future capacity expansions, making it suitable if you upgrade a standard desktop PC.
Pros
- Single 16GB module leaves motherboard memory slots open
- Runs at 3200MT/s with CL16 latency
- Includes Intel XMP profile support
- Standard 1.35V operating voltage
Cons
- Single-stick 1x16GB configuration operates in single-channel mode alone
- Top speed of 3200MT/s is lower than 3600MT/s options
Good fit if
- You want a single 16GB stick to keep memory slots open on your motherboard.
- You need standard 3200MT/s CL16 memory with Intel XMP profile support.
Skip if
- You want a matched dual-channel pair out of the box.
- You require a faster 3600MT/s data rate.
Verdict: G.SKILL Ripjaws V 16GB Single-Module DDR4 RAM fits desktop builders who need a 3200MT/s 16GB stick while keeping spare DIMM slots free for future expansion.
G.SKILL Ripjaws V 16GB (2x8GB) DDR4 3200MHz
Best for: desktop builders wanting dual-channel 3200MT/s DDR4
- Total Capacity
- 16GB
- Memory Speed
- 3200MT/s
- CAS Latency
- CL16
- Voltage
- 1.35V
- Module Configuration
- 2x8GB
- Form Factor
- U-DIMM
View on Amazon: G.SKILL Ripjaws V 16GB (2x8GB) DDR4 3200MHz Affiliate link
This G.SKILL Ripjaws V dual-channel kit delivers 16GB of DDR4 memory using two 8GB modules. It operates at 3200MT/s with CL16-18-18-38 timings at 1.35V when you enable its Intel XMP profile. It fits desktop motherboards using 288-pin U-DIMM slots and non-ECC support. You get balanced bandwidth for everyday gaming and multitasking on compatible desktop systems.
Pros
- Dual-channel 2x8GB configuration providing 16GB total capacity
- 3200MT/s speed with CL16-18-18-38 timings
- Pre-configured Intel XMP profile for overclocking setup
- Operates at 1.35V tested voltage
Cons
- Lower data rate than 3600MT/s kits on the list
- Requires manual BIOS or XMP configuration to exceed base JEDEC speed
Good fit if
- You want a dual-channel 16GB configuration using two matched 8GB sticks.
- You have a desktop motherboard with 288-pin U-DIMM slots and Intel XMP support.
Skip if
- You need 3600MT/s memory for higher throughput.
- You require ECC memory for specialized workstation hardware.
Verdict: G.SKILL Ripjaws V 16GB (2x8GB) DDR4-3200 RAM gives desktop PC builders a matched dual-module memory configuration with Intel XMP profile support for 3200MT/s operation. It serves standard desktop gaming and everyday multitasking setups that do not demand 3600MT/s transfer rates.
G.SKILL Ripjaws DDR4 SO-DIMM 16GB 2400MHz
Best for: laptop upgrades needing standard DDR4 speed
- Total Capacity
- 16 GB
- Memory Speed
- 2400 MT/s
- CAS Latency
- CL16
- Voltage
- 1.20 V
- Module Configuration
- 2 x 8 GB
- Form Factor
- SO-DIMM
View on Amazon: G.SKILL Ripjaws DDR4 SO-DIMM 16GB 2400MHz Affiliate link
This is a G.SKILL Ripjaws DDR4 SO-DIMM kit with 16GB capacity (2x8GB). It runs at 2400MHz with CL16 latency and 1.20V. The modules are 3.94 inches long and weigh 1.06 ounces. It is designed for laptops and notebooks. You should use it if you need standard speed DDR4 memory for portable computers that require SO-DIMM form factors.
Pros
- 16GB total capacity in a 2x8GB kit
- 2400MHz memory speed
- CL16 CAS latency
- 1.20V operating voltage
- Non-ECC unbuffered design
Cons
- 2400MHz speed is lower than the 3200MHz or 3600MHz kits on this list
- SO-DIMM form factor limits use to laptops, not desktops
- No RGB lighting or heat spreader included
Good fit if
- You need to upgrade a laptop with 260-pin SO-DIMM slots
- You require a standard 16GB configuration for general computing
- You want a non-ECC memory kit for a notebook
Skip if
- You are building or upgrading a desktop computer
- You need memory speeds above 3200MT/s for high-performance tasks
- You require RGB lighting for your system aesthetic
Verdict: G.SKILL Ripjaws DDR4 16GB SO-DIMM is a standard laptop memory kit for users who need reliable 2400MHz performance. It fits users upgrading portable computers who do not require high-speed desktop modules.
G.SKILL Trident Z RGB 16GB DDR4-3200 RAM Kit
Best for: standard DDR4 desktop gaming builds
- Total Capacity
- 16GB
- Memory Speed
- 3200MT/s
- CAS Latency
- CL16
- Voltage
- 1.35V
- Module Configuration
- 2x8GB
- Form Factor
- U-DIMM
View on Amazon: G.SKILL Trident Z RGB 16GB DDR4-3200 RAM Kit Affiliate link
This 16GB dual-channel desktop kit pairs two 8GB DDR4 modules running at 3200MT/s with CL16 latency at 1.35V. It supports Intel XMP profiles for direct BIOS configuration and fits standard 288-pin UDIMM motherboards. It suits you if you need balanced memory speeds and RGB lighting for a desktop build without manual timing adjustments.
Pros
- 3200MT/s rated speed with CL16 latency
- Dual-channel 16GB kit using two 8GB modules
- Intel XMP profile support for overclock configuration
Cons
- Module height of 1.73 inches can limit clearance under bulky CPU air coolers
- Lower 3200MT/s transfer speed than the 3600MT/s alternatives on the list
Good fit if
- You want a 16GB dual-channel setup operating at 3200MT/s CL16.
- You have a desktop system with space for 1.73-inch tall heat spreaders.
Skip if
- You need low-profile RAM modules for a compact CPU cooler configuration.
- You want higher DDR4 bandwidth from a 3600MT/s memory kit.
Verdict: G.SKILL Trident Z RGB 16GB DDR4-3200 RAM Kit fits desktop builders who want CL16 timings and standard 3200MT/s speeds with integrated RGB styling.
G.SKILL Trident Z RGB 16GB 3600MHz RAM
Best for: desktop builders wanting 3600MT/s RGB memory
- Total Capacity
- 16GB
- Memory Speed
- 3600MT/s
- CAS Latency
- CL18
- Voltage
- 1.35V
- Module Configuration
- 2x8GB
- Form Factor
- U-DIMM
View on Amazon: G.SKILL Trident Z RGB 16GB 3600MHz RAM Affiliate link
This dual-channel desktop kit gives you 16GB of DDR4 memory across two 8GB modules. It is rated for speeds up to 3600MT/s with CL18-22-22-42 timings at 1.35V using an Intel XMP profile. If you want higher bandwidth and integrated RGB lighting for your standard desktop PC build, this kit fits those exact hardware requirements.
Pros
- Rated transfer speed up to 3600MT/s
- Pre-configured Intel XMP overclock profile
- Dual-channel kit with two matched 8GB modules
- Standard 1.35V operational voltage
Cons
- Requires manual BIOS adjustments to reach the advertised 3600MT/s profile
- Higher CAS latency at CL18 compared to CL16 alternatives
Good fit if
- You want a 16GB dual-channel setup rated for 3600MT/s speeds.
- You use an Intel or AMD desktop motherboard supporting XMP overclock profiles.
- You prefer memory sticks with integrated RGB illumination.
Skip if
- You need error-correcting ECC memory for specialized workstations.
- You want lower base CAS timings than CL18.
Verdict: G.SKILL Trident Z RGB 16GB 3600MT/s DDR4 RAM delivers high memory frequency and onboard lighting for desktop builders using XMP-ready motherboards. It suits users who prioritize 3600MT/s operation across a dual-channel 16GB setup over tighter CAS latencies.
G.SKILL Ripjaws V 16GB 3000MHz DDR4 RAM
Best for: desktop builders needing reliable 3000MT/s dual-channel DDR4
- Total Capacity
- 16GB
- Memory Speed
- 3000MT/s
- CAS Latency
- CL16
- Voltage
- 1.35V
- Module Configuration
- 2x8GB
- Form Factor
- U-DIMM
View on Amazon: G.SKILL Ripjaws V 16GB 3000MHz DDR4 RAM Affiliate link
This G.SKILL Ripjaws V kit provides 16GB of desktop memory across two 8GB DDR4 modules. It operates at 3000MT/s with CL16-18-18-38 timings at 1.35V using Intel XMP. Designed for standard 288-pin desktop motherboards, this dual-channel setup suits you if you want dependable standard-frequency memory for desktop gaming or daily workloads without complex configuration.
Pros
- Dual-channel 2x8GB module configuration
- Tested CL16-18-18-38 latency timings
- Intel XMP profile support for overclock setup
Cons
- 3000MT/s speed is slower than 3200MT/s and 3600MT/s options on the list
- Non-ECC design lacks error checking support
Good fit if
- You need a matched 16GB dual-channel DDR4 kit for a desktop build.
- You run an Intel or AMD motherboard validated for 3000MT/s operation.
Skip if
- You want higher transfer rates like 3200MT/s or 3600MT/s.
- You need ECC memory support for workstation stability.
Verdict: G.SKILL Ripjaws V 16GB (2x8GB) DDR4-3000 RAM delivers dual-channel 16GB capacity at CL16 timings for desktop builders prioritizing 3000MT/s stability over maximum overclock bandwidth.
G.SKILL Ripjaws V 16GB DDR4-3600 CL16 RAM Kit
Best for: desktop systems needing low-latency 3600MT/s DDR4
- Total Capacity
- 16GB
- Memory Speed
- 3600MT/s
- CAS Latency
- CL16
- Voltage
- 1.35V
- Module Configuration
- 2x8GB
- Form Factor
- U-DIMM
View on Amazon: G.SKILL Ripjaws V 16GB DDR4-3600 CL16 RAM Kit Affiliate link
This G.SKILL desktop memory kit gives you 16GB of total capacity across two 8GB DDR4 modules. It supports speeds up to 3600MT/s with CL16 latency using an Intel XMP profile at 1.35V. It fits standard 288-pin desktop motherboards. You get dual-channel bandwidth with low latency, suiting standard desktop builds that need fast memory without RGB lighting.
Pros
- 3600MT/s speed with low CL16 latency
- 2x8GB dual-channel configuration
- Intel XMP profile support for overclocking
Cons
- Requires manual BIOS overclocking or XMP enabling to reach rated speed
- Non-ECC design excludes error-checking hardware environments
Good fit if
- You need 16GB of DDR4 memory running at 3600MT/s with CL16 latency
- You have a desktop system with a 288-pin UDIMM motherboard supporting Intel XMP
Skip if
- You require more than 16GB of total system RAM
- You need SO-DIMM memory for a laptop or compact system
Verdict: G.SKILL Ripjaws V 16GB 3600MT/s CL16 DDR4 RAM fits desktop users who prioritize low CAS latency and high frequency in a dual-channel 16GB configuration.
G.SKILL Ripjaws V 16GB (2x8GB) DDR4-3600 RAM
Best for: dual-channel desktop systems needing 3600MT/s memory
- Total Capacity
- 16GB
- Memory Speed
- 3600MT/s
- CAS Latency
- CL18
- Voltage
- 1.35V
- Module Configuration
- 2x8GB
- Form Factor
- U-DIMM
View on Amazon: G.SKILL Ripjaws V 16GB (2x8GB) DDR4-3600 RAM Affiliate link
This G.SKILL Ripjaws V memory kit delivers 16GB of desktop storage across two 8GB modules. Operating at 3600MT/s with CL18 latency at 1.35V, it utilizes an Intel XMP profile to reach rated speeds. It suits you if you want a dual-channel 288-pin UDIMM setup designed for standard gaming rigs or desktop productivity configurations without lighting.
Pros
- Runs at 3600MT/s using Intel XMP overclocking profile
- Dual-channel kit with two matched 8GB modules
- Operates at 1.35V tested voltage
- Standard 288-pin UDIMM desktop form factor
Cons
- Boots to default JEDEC speed without BIOS adjustments
- CL18-22-22-42 timings offer looser latency than CL16 alternatives
- Non-ECC specification lacks hardware error correction
Good fit if
- You need a 16GB dual-channel DDR4 kit operating at 3600MT/s.
- You have an Intel or AMD desktop motherboard supporting XMP overclocking profiles.
Skip if
- You need error-correcting ECC memory for specialized workstations.
- You want plug-and-play 3600MT/s operation without adjusting BIOS settings.
Verdict: G.SKILL Ripjaws V 16GB (2x8GB) 3600MT/s DDR4 RAM provides 3600MT/s performance at CL18 for desktop users building a dual-channel system with XMP motherboard support.
G.Skill Trident Z RGB 16GB (2x8GB) 3600MHz DDR4
Best for: desktop systems needing 3600MT/s dual-channel capacity
- Total Capacity
- 16GB
- Memory Speed
- 3600MT/s
- CAS Latency
- CL18
- Voltage
- 1.35V
- Module Configuration
- 2x8GB
- Form Factor
- U-DIMM
View on Amazon: G.Skill Trident Z RGB 16GB (2x8GB) 3600MHz DDR4 Affiliate link
This dual-channel kit gives you 16GB of DDR4 desktop memory divided into two 8GB modules. It is rated for speeds up to 3600MT/s with CL18-22-22-42 timings at 1.35V. Using the Intel XMP profile, it matches desktop systems where you need higher clock frequencies without manual voltage tuning beyond the standard overclock profile.
Pros
- Rated transfer speed up to 3600MT/s
- Pre-configured Intel XMP overclock profile
- Dual-channel configuration across two 8GB modules
Cons
- CL18 latency is slower than CL16 alternatives
- Requires manual BIOS adjustments to achieve rated 3600MT/s speed
- Lacks ECC error-checking support
Good fit if
- You need 16GB split across two channels for desktop gaming or daily multitasking.
- You run a motherboard and CPU combination capable of 3600MT/s XMP profiles.
Skip if
- You require sub-CL18 CAS timings for latency-sensitive tasks.
- You need error-correcting code (ECC) memory for workstation stability.
Verdict: G.SKILL Trident Z RGB 16GB (2x8GB) DDR4-3600 delivers 3600MT/s transfer speeds for desktop users who prioritize higher clock rates over tighter CAS latencies.
G.SKILL Ripjaws 16GB 3200MHz DDR4 SO-DIMM
Best for: Laptop DDR4 memory upgrades
- Total Capacity
- 16GB
- Memory Speed
- 3200MT/s
- CAS Latency
- CL22
- Voltage
- 1.20V
- Module Configuration
- 1x16GB
- Form Factor
- SO-DIMM
View on Amazon: G.SKILL Ripjaws 16GB 3200MHz DDR4 SO-DIMM Affiliate link
This G.SKILL Ripjaws memory module gives you 16GB of DDR4 capacity in a compact 260-pin SO-DIMM format for notebooks. It operates at 3200MT/s with CL22 timings and a standard 1.20V profile. This single-stick upgrade suits you if you need to replace or expand internal memory in a compatible DDR4 laptop without altering default BIOS voltages.
Pros
- 260-pin SO-DIMM design fits notebook memory slots
- Runs at 3200MT/s at standard 1.20V operating voltage
- Single 16GB module leaves room for future expansion
Cons
- CL22 latency is higher than desktop DDR4 kits
- Single module runs in single-channel mode alone
- Incompatible with standard desktop 288-pin DIMM slots
Good fit if
- You need a single 16GB DDR4 upgrade for a laptop.
- You want plug-and-play 3200MT/s speed at 1.20V without BIOS tuning.
Skip if
- You are building or upgrading a desktop PC requiring 288-pin DIMMs.
- You want tighter CAS timings than CL22.
Verdict: G.SKILL Ripjaws 16GB DDR4 SO-DIMM Laptop RAM is built for notebook owners seeking a single-module 3200MT/s upgrade that runs at standard 1.20V.
Specifications side by side
| Spec | G.SKILL Trident Z RGB 16GB DDR4 RAM Kit | G.SKILL RipjawsV 8GB 2400MHz Red | G.SKILL Ripjaws V 16GB (2x8GB) 3200MHz DDR4 RAM | G.SKILL Ripjaws V 16GB DDR4 3200MHz UDIMM | G.SKILL Ripjaws V 16GB (2x8GB) DDR4 3200MHz | G.SKILL Ripjaws DDR4 SO-DIMM 16GB 2400MHz | G.SKILL Trident Z RGB 16GB DDR4-3200 RAM Kit | G.SKILL Trident Z RGB 16GB 3600MHz RAM | G.SKILL Ripjaws V 16GB 3000MHz DDR4 RAM | G.SKILL Ripjaws V 16GB DDR4-3600 CL16 RAM Kit | G.SKILL Ripjaws V 16GB (2x8GB) DDR4-3600 RAM | G.Skill Trident Z RGB 16GB (2x8GB) 3600MHz DDR4 | G.SKILL Ripjaws 16GB 3200MHz DDR4 SO-DIMM |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Total Capacity | 16GB | 8GB | 16GB | 16GB | 16GB | 16 GB | 16GB | 16GB | 16GB | 16GB | 16GB | 16GB | 16GB |
| Memory Speed | 3000MT/s | 2400MT/s | 3200MT/s | 3200MT/s | 3200MT/s | 2400 MT/s | 3200MT/s | 3600MT/s | 3000MT/s | 3600MT/s | 3600MT/s | 3600MT/s | 3200MT/s |
| CAS Latency | CL16 | CL15 | CL16 | CL16 | CL16 | CL16 | CL16 | CL18 | CL16 | CL16 | CL18 | CL18 | CL22 |
| Voltage | 1.35V | 1.20V | 1.35V | 1.35V | 1.35V | 1.20 V | 1.35V | 1.35V | 1.35V | 1.35V | 1.35V | 1.35V | 1.20V |
| Module Configuration | 2x8GB | 2x4GB | 2x8GB | 1x16GB | 2x8GB | 2 x 8 GB | 2x8GB | 2x8GB | 2x8GB | 2x8GB | 2x8GB | 2x8GB | 1x16GB |
| Form Factor | U-DIMM | U-DIMM | U-DIMM | U-DIMM | U-DIMM | SO-DIMM | U-DIMM | U-DIMM | U-DIMM | U-DIMM | U-DIMM | U-DIMM | SO-DIMM |
| ECC Support | Non-ECC | Non-ECC | Non-ECC | Non-ECC | Non-ECC | Non-ECC | Non-ECC | Non-ECC | Non-ECC | Non-ECC | Non-ECC | Non-ECC | Non-ECC |
| Height | 1.7 inches | not stated | not stated | not stated | not stated | not stated | 1.73 inches | not stated | not stated | 0.17 inches | 0.65 inches | not stated | not stated |
| Compatible Device | Desktop, PC | Desktop, PC | Desktop, PC | Desktop, PC | Desktop, PC | Laptop | Desktop, PC | Desktop, PC | Desktop, PC | Desktop, PC | Desktop, PC | Desktop, PC | Laptop |
| Size | 16GB | 8GB | 16GB (2x8GB) | 16GB | 16GB (2x8GB) | 16GB (8GBx2) | 16GB (2x8GB) | 16GB | 16GB | 16GB (2x8GB) | 16GB (2x8GB) | 16GB (2x8GB) | 16GB |
| Dimensions | 5.2 × 0.67 × 1.7 inches | 5.4 × 0.55 × 0.17 inches | 5.24 × 0.28 × 1.73 inches | 3.94 × 3.94 × 3.94 inches | 5.4 × 0.55 × 0.17 inches | 3.94 × 1.97 × 0.79 inches | 5.31 × 0.31 × 1.73 inches | 3.94 × 1.57 × 0.39 inches | not stated | 5.4 × 0.55 × 0.17 inches | 8.55 × 5.55 × 0.65 inches | 7.87 × 2.36 × 2.36 inches | 3.94 × 1.18 × 0.2 inches |
| Weight | 4.8 ounces | 4.6 ounces | 3.53 ounces | 2.4 ounces | not stated | 1.06 ounces | 4.87 ounces | 5.29 ounces | not stated | not stated | not stated | 6 ounces | 0.6 ounces |
| Color | Multicolor | Red | Black | various | Red | 2400MHz | Black | Multicolor | Red | Black | Black | Black | not stated |
| Model | F4-3000C16D-16GTZR | F4-2400C15D-8GVR | FBA_4719692004970 | F4-3200C16S-16GVK | F4-3200C16D-16GVRB | F4-2400C16D-16GRS | 202715 | F4-3600C18D-16GTZRX | F4-3000C16D-16GVRB | F4-3600C16D-16GVKC | F4-3600C18D-16GVK | F4-3600C18D-16GTZR | F4-3200C22S-16GRS |
If you plan outdoor projects alongside computer builds, compare dimensions in best greenhouses under 150 to check frame materials.
How to Choose the Right G.SKILL DDR4 RAM
-
Match Memory Speed to Needs
Higher transfer rates improve data throughput. The Trident Z RGB 16GB runs at 3000MHz, while the Trident Z RGB 16GB 3600MHz reaches 3600MT/s. You should choose 3600MT/s if your motherboard supports XMP profiles and you need maximum bandwidth for gaming. Lower speeds like 2400MHz in the Ripjaws SO-DIMM are sufficient for basic laptop upgrades. Check your motherboard specifications to ensure it can handle your desired frequency without stability issues.
-
Select the Correct Form Factor
Desktop builds require UDIMM modules, while laptops need SODIMM sticks. The Trident Z RGB uses UDIMM for standard desktop towers. The Ripjaws DDR4 SO-DIMM is designed specifically for portable computers. Installing the wrong form factor will prevent the memory from fitting into your slots. Verify your device type before purchasing. Desktop users should look for UDIMM labels, while laptop owners must search for SODIMM to ensure physical compatibility with their internal memory slots.
-
Prioritize Low CAS Latency
CAS latency affects response time. Lower numbers mean faster data access. The RipjawsV 8GB 2400MHz Red offers CL15, the tightest timing in this group. The Ripjaws 16GB 3200MHz DDR4 SO-DIMM has a higher CL22 latency. If you prioritize quick response for specific tasks, CL15 is ideal. Higher speeds like 3600MT/s often come with CL18. Balance speed and latency based on your motherboard capabilities and specific performance requirements for your workload.
-
Choose the Right Capacity
Capacity determines how many applications run simultaneously. Most kits offer 16GB, split into two 8GB sticks for dual-channel performance. The RipjawsV 16GB Single-Module provides 16GB in one stick, leaving other slots free for future upgrades. Single-module kits are useful for expansion headroom. Dual-stick kits like the Ripjaws V 16GB (2x8GB) provide balanced dual-channel bandwidth. Select 16GB for modern gaming and multitasking needs without bottlenecking your system performance.
-
Check Voltage Requirements
Voltage impacts power consumption and heat. Most desktop DDR4 kits listed operate at 1.35V. The Ripjaws 16GB 3200MHz DDR4 SO-DIMM for laptops runs at standard 1.20V. Ensure your power supply and motherboard support the required voltage. Higher voltage like 1.35V is typical for overclocked desktop speeds. Lower voltage is standard for mobile devices. Matching voltage to your device type ensures stable operation and prevents potential compatibility issues with your system's power delivery.
Frequently asked questions
Which G.SKILL DDR4 RAM has the lowest latency?
The G.SKILL RipjawsV 8GB 2400MHz Red holds the lowest latency at CL15. This specification makes it ideal for older desktops where low latency matters more than high bandwidth. It operates at 2400MHz with a single 8GB module. You should choose this if your system supports 2400MHz and you prioritize tight timings.
Can I use G.SKILL DDR4 in my laptop?
Yes, you can use specific G.SKILL kits in laptops. The Ripjaws DDR4 SO-DIMM 16GB 2400MHz and the Ripjaws 16GB 3200MHz DDR4 SO-DIMM are designed for portable computers. These modules use the SODIMM form factor, which fits laptop slots. Desktop UDIMM kits will not fit in these devices.
Does G.SKILL offer single-module 16GB options?
Yes, the Ripjaws V 16GB DDR4 3200MHz UDIMM is a single-module option. It provides 16GB of capacity in one stick, leaving other DIMM slots free for future expansion. This configuration runs at 3200MHz with CL16 latency. It is suitable for desktop builders who need extra room for additional memory later.
What is the fastest speed available in this list?
The fastest speed available is 3600MHz. Several kits, including the Trident Z RGB 16GB 3600MHz RAM and the Ripjaws V 16GB DDR4-3600 CL16 RAM Kit, operate at this transfer rate. These kits are designed for desktops with XMP-ready motherboards. They deliver high bandwidth for users who prioritize frequency over tighter CAS latencies.
Which G.SKILL RAM includes RGB lighting?
The Trident Z RGB series includes integrated lighting. The 16GB DDR4 RAM Kit at 3000MHz and the 16GB 3600MHz RAM both feature this styling. These kits use UDIMM form factors for desktops. You should select these if you want visible RGB effects alongside standard dual-channel memory performance.
Is there a G.SKILL kit with CL16 latency at 3600MHz?
Yes, the Ripjaws V 16GB DDR4-3600 CL16 RAM Kit offers this combination. It provides 3600MT/s speed with CL16 timings in a dual-channel 16GB setup. This configuration suits desktop users who want both high frequency and low latency. It runs at 1.35V and uses the standard UDIMM form factor.