G.SKILL Ripjaws S5 64GB DDR5-6000 Review: Specs, Pros and Cons

What stands out

• 64GB capacity via 2x32GB modules
• 6000MT/s speed with CL36 latency
• Supports Intel XMP 3.0 and AMD EXPO
• 1.35V operating voltage
• Non-ECC DDR5 U-DIMM form factor

Who it fits

Key specs explained for this kit

Capacity: 64GB (2x32GB)

This kit provides 64GB of total memory, split into two 32GB modules. You get ample space for heavy multitasking, large datasets, and modern games without hitting limits. The dual-channel configuration helps balance performance between the two sticks. If you run virtual machines or edit video, this capacity reduces the need to swap data to your storage drive.

Memory Speed: 6000MT/s

The modules transfer data at 6000 million transfers per second. This speed is a sweet spot for current DDR5 platforms, offering strong bandwidth for gaming and content creation. Faster speeds can improve frame rates in CPU-bound scenarios. You should verify your motherboard and CPU support this rate to ensure stability and optimal performance.

CAS Latency: CL36

CL36 indicates the delay before the memory responds to a command from the CPU. Lower latency means faster response times for specific tasks. This value pairs with the 6000MT/s speed to define overall efficiency. When comparing kits, look at the latency alongside speed to gauge real-world performance rather than speed alone.

Overclocking Profile: Intel XMP 3.0 & AMD EXPO

These profiles allow you to easily enable the rated speed and timings via your BIOS. XMP is for Intel systems, while EXPO is for AMD. Without these profiles, the kit runs at slower default JEDEC speeds. Enabling them ensures you get the performance you paid for with minimal manual configuration effort.

Physical Design and Build Quality

According to the listing, the G.SKILL Ripjaws S5 kit features a matte black finish. This color choice helps the modules blend seamlessly into most modern PC cases. The design prioritizes a low profile, ensuring compatibility with large air coolers. You should verify that your specific cooler does not obstruct the memory slots. The modules are standard U-DIMMs with a 288-pin configuration. This form factor is standard for desktop PCs, making installation straightforward for most builders.

The kit includes two 32GB modules. Each stick is part of a matched pair, designed to run together for stability. The listing notes that mixing different kits can cause system failure. You must install both modules in the correct slots on your motherboard. The voltage is set at 1.35V. This is the standard operating voltage for DDR5 memory at this speed tier. It balances performance with thermal efficiency.

Weight is listed as 2.54 ounces for the kit. This light weight suggests the use of standard aluminum heat spreaders. They are not overly bulky. The layout is simple, with no complex RGB lighting or additional controls. You get a clean look without extra cables. The model number F5-6000J3636F32GX2-RS5K identifies the exact variant. This ensures you purchase the correct version for your system. The build is utilitarian, focusing on function over flashy aesthetics.

Setup and Everyday Use

Setting up this G.SKILL Ripjaws S5 kit requires specific motherboard support and BIOS adjustments. The listing confirms compatibility with Intel Z890, Z790, Z690, B860, B760, and B660 platforms. It also supports AMD X870, X670, B850, B840, and B650 motherboards. You must verify your hardware against the G.SKILL QVL or RAM Configurator tool to ensure stability.

The kit includes JEDEC default profiles for basic operation. For maximum speed, you enable Intel XMP 3.0 or AMD EXPO profiles. This process involves entering your BIOS and selecting the appropriate overclocking profile. The modules operate at 1.35V when running at the advertised 6000MT/s speed. Without these adjustments, the memory boots at JEDEC default SPD speeds.

Daily use depends on your system components. Maximum speed and performance rely on your CPU and motherboard capabilities. The kit is designed for desktop PCs and gaming systems. It uses Non-ECC technology, which is standard for consumer desktops.

You should not mix this kit with other memory modules. The manufacturer states that mixing kits causes stability issues or system failure. The modules are sold as matched sets to run together. Consistent use requires adhering to these specifications. Deviating from manufacturer recommendations may result in lower speeds or damage. This setup ensures your 64GB of memory functions reliably at the specified latency and speed.

Before you buy this memory kit

You need to ensure your motherboard supports these specific platforms. The listing confirms compatibility with Intel Z890, Z790, Z690, B860, B760, and B660 chipsets. It also works with AMD X870, X670, B850, B840, and B650 boards. You must enable the Intel XMP 3.0 or AMD EXPO profile in your BIOS. Without this step, the kit boots at the slower JEDEC default speed. Do not mix this kit with other RAM modules. Mixing kits causes stability issues or system failure. You should verify your CPU compatibility as well. Maximum speed depends on your processor. This 64GB kit suits users needing high bandwidth for heavy multitasking. It fits well alongside other high-performance DDR5 options for desktop gaming and content creation. Always check the manufacturer’s QVL for validated hardware before purchasing.

Check before you buy

• Verify your motherboard is on the supported Intel or AMD list.
• Enable XMP 3.0 or EXPO in BIOS for full speed.
• Do not mix this kit with other RAM modules.
• Check your CPU supports 6000MT/s speeds for best results.

The product at a glance

1

G.SKILL Ripjaws S5 64GB DDR5-6000 Kit

Best for: High-capacity gaming and content creation

Capacity

64GB

Memory Speed

6000MT/s

CAS Latency

CL36

Kit Configuration

2x32GB

Form Factor

288-pin U-DIMM

Overclocking Profile

Intel XMP 3.0 & AMD EXPO

View on Amazon: G.SKILL Ripjaws S5 64GB DDR5-6000 Kit Affiliate link

This G.SKILL Ripjaws S5 kit delivers 64GB of DDR5 memory running at 6000MT/s with CL36 latency. It uses a 1.35V voltage profile and supports both Intel XMP 3.0 and AMD EXPO for easy overclocking. The matte black modules fit standard desktop PCs. You get a matched 2x32GB configuration designed for stability. This setup suits gamers and creators who need high bandwidth for demanding tasks.

Pros

• 64GB capacity via 2x32GB modules
• 6000MT/s speed with CL36 latency
• Supports Intel XMP 3.0 and AMD EXPO
• Matte black finish for clean builds

Cons

• Requires BIOS adjustments to reach rated speed
• Non-ECC memory lacks error correction
• 1.35V voltage may limit extreme overclocking

Good fit if

• You need 64GB of RAM for heavy multitasking
• You use Intel or AMD platforms with XMP/EXPO support
• You want a matched kit for stability

Skip if

• You require error-correcting ECC memory
• You prefer plug-and-play JEDEC speeds only
• You need more than 64GB capacity

Verdict: G.SKILL Ripjaws S5 64GB DDR5-6000 is a solid choice for users who need high capacity and speed for gaming or content creation. It fits well in systems that support XMP 3.0 or EXPO profiles.

Specifications side by side

Frequently asked questions

See also

• g skill ripjaws s5 64gb ddr5 6000 alternatives
• best g skill 6000MHz ddr5 RAMs
• g skill USB km360 professional tenkeyless mechanical keyboard review
• lattepanda 4g 64gb review