G.SKILL Ripjaws V 64GB DDR4-3600 Review: Specs, Pros and Cons

What stands out

• 64GB total capacity via two 32GB modules
• DDR4-3600 memory speed for fast data transfer
• CL18 latency with 18-22-22-42 timing sequence
• 1.35V operating voltage for efficient power use

Who it fits

Key specs explained for this kit

Capacity: 64GB

This total capacity comes from two 32GB modules. You get enough room for heavy multitasking or large datasets. It suits users who run virtual machines or edit 4K video. If you only browse the web, this is more than you need. Compare this to 16GB or 32GB kits for lighter tasks.

Memory Speed: DDR4-3600

This frequency indicates how fast the memory transfers data. DDR4-3600 is a common sweet spot for modern systems. It helps reduce stuttering in games and speeds up file loads. Check your motherboard support to ensure it runs at this rate. Slower kits like DDR4-2666 may limit performance in demanding applications.

CAS Latency: CL18

This number measures the delay before data access begins. CL18 is a standard latency for this speed tier. Lower numbers generally mean faster response times. It balances well with the 3600MHz speed. When shopping, compare this to CL16 or CL22 options to see how latency affects your specific workload.

Voltage: 1.35V

This is the electrical pressure required to run the modules. 1.35V is the standard XMP profile voltage for DDR4. It ensures stability at the advertised speeds. Your motherboard must support this voltage setting. Standard JEDEC speeds often use lower voltages, so you must enable XMP in your BIOS for this performance.

Design and build details

According to the listing, the G.SKILL Ripjaws V modules measure 5.24 inches in length and 0.31 inches in height. This low-profile design ensures the heat spreaders clear most standard air coolers. You can install these sticks without removing your CPU cooler, which simplifies upgrades for users with large cooling solutions. The width is 1.77 inches, fitting standard DIMM slots on desktop motherboards. The total weight is 4.23 ounces for the pair. This light weight means you do not need to worry about sagging or stressing the motherboard slots over time. The 288-pin form factor confirms compatibility with DDR4 slots. This physical layout is standard for modern desktops. The finish is not detailed in the specs, so you should check product images for aesthetic preferences. The compact height allows for clean cable management inside the case. You can stack components without interference. The dimensions are consistent with high-performance kits. This build quality supports stable operation under load. The physical size does not restrict airflow significantly. You can place these modules in any dual-channel configuration. The listing does not mention additional RGB lighting controls. The design prioritizes function over flash. This makes them suitable for workstations where space is tight. The sturdy construction protects the chips during transport. You can trust the fit in standard ATX cases. The dimensions are precise for reliable seating.

Setup and everyday use

This kit is designed for dual-channel operation. You install two 32GB modules into your motherboard. The listing specifies compatibility with AMD Ryzen X570 and B550 series chipsets. It also supports Intel Z390, Z490, and newer platforms. You must ensure your system supports DDR4 memory. The modules run at DDR4-3600 speed. This frequency is part of the PC4-28800 rating. The kit operates at 1.35V. This voltage is standard for high-performance DDR4 kits. You do not need ECC memory for this setup. The CAS Latency is CL18. The full timing sequence is 18-22-22-42. These timings affect how quickly the memory responds to requests. The 288-pin design fits standard desktop DIMM slots. The low-profile height of 0.31 inches helps with airflow. You can place these sticks under most air coolers. The total weight is 4.23 ounces. This is light for desktop components. Daily use involves the system accessing this 64GB pool. Large applications load faster due to the capacity. The dual-channel architecture helps maintain speed when using both slots. You get high performance for gaming or heavy workloads. The model number F4-3600C18D-64GVK identifies this specific configuration. You should check your motherboard QVL for best results. The specs indicate it is ready for demanding tasks. You simply insert the sticks and enable XMP or DOCP in BIOS. The system then runs at the rated 3600MHz speed.

Before you buy this kit

Before you buy this G.SKILL Ripjaws V kit, verify your motherboard supports DDR4-3600 speeds. You must check that your CPU is compatible with AMD Ryzen X570, B550, or Intel Z390, Z490 platforms. The listing confirms dual-channel operation, so you need to install both 32GB modules in the correct slots for optimal performance. Ensure your case has enough clearance for the 5.24-inch length, although the 0.31-inch height is low-profile. You do not need ECC support for this non-ECC kit. Keep the heat spreaders clean to maintain thermal efficiency. This high-capacity option suits users running virtual machines or editing 4K video. If you only browse the web, consider lower capacity kits. Compare this against other 64GB DDR4 options based on your specific latency and voltage requirements for your build.

Check before you buy

• Verify motherboard supports DDR4-3600 speed
• Check CPU compatibility with X570, B550, Z390, or Z490
• Ensure case clearance for 5.24-inch length
• Install both modules for dual-channel operation

The product at a glance

1

G.SKILL Ripjaws V 64GB DDR4-3600 CL18 Kit

Best for: Desktop creators needing 64GB capacity

Total Capacity

64GB

Memory Speed

3600MHz

CAS Latency

CL18

Voltage

1.35V

Module Configuration

2x32GB

ECC Support

Non-ECC

View on Amazon: G.SKILL Ripjaws V 64GB DDR4-3600 CL18 Kit Affiliate link

This G.SKILL Ripjaws V kit gives you 64GB of DDR4 memory across two 32GB modules. It runs at 3600MHz with CL18 latency at 1.35V. The 288-pin design fits standard desktops. You get high performance for gaming or heavy workloads. The modules are built for AMD Ryzen X570 and B550 chips, plus Intel Z390 and newer boards.

Pros

• Generous 64GB total capacity for multitasking
• Fast DDR4-3600 speed for responsive performance
• Optimized for AMD Ryzen and Intel Z-series platforms
• Dual-channel configuration for balanced data throughput

Cons

• Higher CAS Latency of CL18 compared to tighter timings
• Requires 1.35V which is above standard JEDEC voltage
• No mention of integrated heat spreader material details

Good fit if

• You need maximum capacity for video editing or 3D rendering
• You are building a system with AMD Ryzen or Intel Z390+ motherboards
• You want a reliable dual-channel kit for high-performance gaming

Skip if

• You require low-latency CL16 or faster timings for competitive gaming
• You are using a laptop or small form factor PC with limited space
• You prefer standard 1.2V DDR4 modules for lower power consumption

Verdict: G.Skill Ripjaws V 64GB DDR4-3600 is a high-capacity memory solution for desktop creators and gamers who prioritize size over tight timings. It suits users building on AMD Ryzen or Intel Z-series platforms who need ample RAM for demanding applications.

Specifications side by side

Frequently asked questions

See also

• g skill ripjaws v series 64gb alternatives
• best g skill ddr4 RAMs for desktop
• vizio 50 inch v series review
• jackson js series king v review