KLEVV Bolt V 32GB DDR5-6000 vs KLEVV FIT V DDR5 32GB (2026): Key Differences
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are comparing the klevv bolt v ddr5 32gb vs fit v ddr5 32gb. Both kits use SK Hynix A-Die chips and offer 32GB of capacity in a 2x16GB configuration. They share low CAS latency and support for modern overclocking profiles. The main difference lies in their base speeds and operating voltages. You need to decide which performance tier fits your specific motherboard and processor requirements.
Key differences
| Aspect | KLEVV Bolt V 32GB DDR5-6000 CL30 | KLEVV FIT V DDR5 32GB 5600MHz |
|---|---|---|
| Memory Speed | 6000MHz | 5600MHz |
| Voltage | 1.35V | 1.25V |
| Height | 34 mm (2.36 inches) | 33.2 mm |
| Color | Black or White | Silver or Black |
| Intel CPU Compatibility | Not listed | 14th generation and earlier only |
Which one should you choose?
Choose KLEVV Bolt V 32GB DDR5-6000 CL30 if
- You need higher base memory speeds for demanding gaming or multitasking.
- You prefer a black or white color option for your build.
- You are using a motherboard that supports higher voltage profiles.
Choose KLEVV FIT V DDR5 32GB 5600MHz if
- You want lower operating voltage for potentially better power efficiency.
- You are building with Intel 14th generation or older processors.
- You prefer a silver heat spreader design.
Verdict: The Bolt V is the better choice if you prioritize higher clock speeds and color variety. The FIT V is suitable if you need strict compatibility with older Intel CPUs or prefer lower voltage operation. Both kits provide reliable performance for desktop gaming.
Bolt V vs FIT V Specs
Memory Speed
The KLEVV Bolt V 32GB DDR5-6000 runs at 6000MHz. This higher frequency can reduce load times and improve frame rates in games. The KLEVV FIT V 32GB DDR5 operates at a slower 5600MHz. While both kits use SK Hynix A-Die chips, the Bolt V offers more bandwidth. You will notice a difference in heavy multitasking. The Bolt V is the better choice if you want maximum throughput. The FIT V is adequate for general tasks but lacks the speed headroom of the Bolt V.
Voltage
Power efficiency matters for heat and stability. The KLEVV Bolt V 32GB DDR5-6000 requires 1.35V to run at its rated speed. The KLEVV FIT V 32GB DDR5 runs at a lower 1.25V. Lower voltage can mean slightly cooler operation under load. However, the Bolt V achieves higher speeds by using more power. The FIT V is more efficient at its native speed. If you prioritize energy use, the FIT V has the advantage. The Bolt V trades efficiency for raw performance.
Form Factor
Height affects compatibility with large CPU coolers. The KLEVV Bolt V 32GB DDR5-6000 has a height of 34 mm. The KLEVV FIT V 32GB DDR5 is slightly lower at 33.2 mm. Both profiles are considered low clearance. This allows installation under most air coolers. The FIT V is marginally thinner. This extra millimeter might help with very tall heatsinks. Both kits use aluminum heat spreaders. The difference is small but favors the FIT V for tight builds.
CAS Latency
Latency impacts response time in applications. Both the KLEVV Bolt V 32GB DDR5-6000 and the KLEVV FIT V 32GB DDR5 have a CAS Latency of CL30. This is a tight timing for DDR5 memory. It means both kits respond quickly to data requests. Since the latency number is identical, neither product has an edge here. You get the same responsiveness from both. The speed difference in MHz is the main variable. The latency remains constant across both models.
Overclocking Profile
Ease of setup is crucial for performance. Both kits support Intel XMP 3.0 and AMD EXPO. This allows one-click optimization on modern platforms. The KLEVV Bolt V 32GB DDR5-6000 is programmed for 6000MHz. The KLEVV FIT V 32GB DDR5 is programmed for 5600MHz. Both profiles are pre-configured for stability. You do not need manual tweaking. The setup process is identical for both. This feature is standard on both kits. Neither product offers a unique advantage in configuration simplicity.
Which KLEVV DDR5 Kit Fits Your Build
Gamers seeking maximum frame rates
The Bolt V runs at 6000MHz with CL30 latency. This higher speed improves gaming performance and reduces load times. It also operates at 1.35V, providing stable power for high-frequency operation. Choose this kit if you prioritize peak speed and minimal latency for competitive titles.
Creators prioritizing power efficiency
The FIT V operates at 5600MHz but uses only 1.25V. This lower voltage reduces heat and power consumption during long rendering sessions. It maintains the same CL30 latency for responsive multitasking. Select this option if you value energy efficiency and thermal management over raw clock speed.
Users with large CPU coolers
The FIT V has a slim profile measuring 33.2mm in height. This low clearance allows it to fit under bulky air coolers without conflict. The Bolt V is slightly taller at 34mm. Pick the FIT V if your build uses tall cooling solutions that require maximum RAM clearance.
The products compared
KLEVV Bolt V 32GB DDR5-6000 CL30
Best for: Gaming builds with large CPU coolers
- Capacity
- 32GB
- Memory Speed
- 6000MHz
- CAS Latency
- CL30
- Kit Configuration
- 2x16GB
- Overclocking Profile
- Intel XMP 3.0, AMD EXPO
- Voltage
- 1.35V
View on Amazon: KLEVV Bolt V 32GB DDR5-6000 CL30 Affiliate link
The KLEVV Bolt V DDR5 32GB kit delivers 6000MHz speed with tight CL30 latency. It uses SK Hynix A-Die chips for reliable performance. The low 34mm height allows easy installation under large CPU coolers. You get Intel XMP 3.0 and AMD EXPO support for simple overclocking. This kit suits gamers who want speed without clearance issues.
Pros
- 6000MHz memory speed with CL30 latency
- Low 34mm height for cooler clearance
- Supports Intel XMP 3.0 and AMD EXPO
- Uses SK Hynix A-Die chips
Cons
- Runs at 1.35V, higher than the 1.25V on the FIT V
- Aluminum heatsink adds bulk compared to low-profile sticks
- Black color only in this specific listing
Good fit if
- You need low-profile RAM for large air coolers
- You want fast 6000MHz speeds with CL30 latency
- You use Intel or AMD platforms with XMP/EXPO support
Skip if
- You require ultra-low voltage operation near 1.25V
- You prefer white RAM for a matching build
- You need speeds faster than 6000MHz
Verdict: KLEVV Bolt V DDR5 32GB 6000MHz fits builders who need low clearance and fast, stable performance. It is a solid choice for gaming rigs with large coolers.
KLEVV FIT V DDR5 32GB 5600MHz
Best for: compact builds and AMD Ryzen systems
- Capacity
- 32GB
- Memory Speed
- 5600MHz
- CAS Latency
- CL30
- Kit Configuration
- 2x16GB
- Overclocking Profile
- Intel XMP 3.0, AMD EXPO
- Voltage
- 1.25V
View on Amazon: KLEVV FIT V DDR5 32GB 5600MHz Affiliate link
The KLEVV FIT V DDR5 kit offers 32GB of capacity across two 16GB modules. It runs at 5600MHz with a tight CL30 latency. The design is ultra-low clearance at 33.2mm, ensuring it fits under most CPU coolers. It supports both Intel XMP 3.0 and AMD EXPO profiles. This low-profile memory suits builders prioritizing compact cases or large air coolers.
Pros
- Ultra-low 33.2mm height for broad cooler compatibility
- Fast 5600MHz speed with CL30 latency
- Supports Intel XMP 3.0 and AMD EXPO
- Uses SK Hynix A-Die memory chips
Cons
- Lower 5600MHz speed compared to the 6000MHz competitor
- Incompatible with Intel 15th generation and newer processors
- Fixed 1.25V voltage limit for this specific speed profile
Good fit if
- You need low-profile RAM for large air coolers
- You build on AMD Ryzen 9000 series or earlier
- You prioritize case clearance over maximum frequency
Skip if
- You use Intel 15th generation or newer processors
- You require speeds higher than 5600MHz
- You are building with the KLEVV Bolt V competitor
Verdict: KLEVV FIT V DDR5 32GB 5600MHz is a compact memory solution for builders with space constraints or AMD systems. It provides reliable performance but lacks the higher frequency of the Bolt V for pure speed seekers.
Specifications side by side
| Spec | KLEVV Bolt V 32GB DDR5-6000 CL30 | KLEVV FIT V DDR5 32GB 5600MHz |
|---|---|---|
| Capacity | 32GB | 32GB |
| Memory Speed | 6000MHz | 5600MHz |
| CAS Latency | CL30 | CL30 |
| Kit Configuration | 2x16GB | 2x16GB |
| Overclocking Profile | Intel XMP 3.0, AMD EXPO | Intel XMP 3.0, AMD EXPO |
| Voltage | 1.35V | 1.25V |
| Compatible Device | Desktop | Desktop |
| Dimensions | 5.24 × 0.28 × 2.36 inches | not stated |
| Size | 32GB (2 x 16GB) | 32GB (2 x 16GB) |
| Color | Black | Silver |
Frequently asked questions
Does the KLEVV Bolt V fit under large CPU coolers?
Yes, the Bolt V is designed for builds with large coolers. Its height is only 0.28 inches. This low profile ensures it clears most air coolers. You can install it without worrying about clearance issues. The kit stands 2.36 inches tall and 5.24 inches long. This slim design makes it a practical choice for dense builds.
Is the KLEVV FIT V compatible with AMD Ryzen processors?
Yes, the FIT V supports AMD EXPO profiles. This allows easy overclocking on AMD Ryzen systems. It runs at 5600MHz with CL30 latency. The kit is silver and compact. It fits well in systems with space constraints. You get reliable performance optimized for AMD platforms without complex manual tuning.
What is the difference in color between the two kits?
The Bolt V comes in black. The FIT V is silver. Both kits hold 32GB of memory in a 2x16GB configuration. The color choice depends on your case aesthetics. The Bolt V has a black finish. The FIT V offers a silver look. This allows you to match your build theme.
Can I use EXPO for both KLEVV DDR5 kits?
Yes, both kits support AMD EXPO. The Bolt V features EXPO for 6000MHz operation. The FIT V also includes EXPO for 5600MHz speeds. You can enable these profiles in your BIOS. This simplifies setup for AMD users. Both kits ensure stable performance with minimal configuration effort.
Which kit has lower CAS latency?
Both kits share the same CAS latency of CL30. The Bolt V runs at 6000MHz. The FIT V runs at 5600MHz. They both offer tight timing for their respective speeds. This consistency means you get similar responsiveness. The difference lies in the base frequency, not the latency value.
Is the Bolt V suitable for gaming rigs?
Yes, the Bolt V is ideal for gaming. It runs at 6000MHz with CL30 latency. This speed reduces load times and improves frame rates. It operates at 1.35V for stability. The low height fits large coolers. You get fast, stable performance tailored for gaming builds. It is a solid choice for enthusiasts.