Timetec DDR4-2666 4GB Replacement Synology Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This timetec ddr4 2666 4gb replacement synology review covers a specific memory module designed for NAS upgrades. The Timetec 4GB DDR4-2666 SODIMM is a single-rank, non-ECC stick operating at 1.2V. It serves as a direct replacement for Synology’s D4NESO-2666-4G part. You get 4GB of capacity at 2666MHz speeds. The module uses a 260-pin SODIMM form factor. It fits into select 18, 19, and 20 series Synology devices. This listing provides the physical and electrical specs needed for compatibility checks. It is not a generic desktop RAM stick.
What stands out
- 2666MHz memory speed with PC4-21300 rating
- Non-ECC, unbuffered SODIMM form factor
- Compatible with RS820RP+, DS920+, and DS1618+ models
- Single rank 1Rx8 configuration with 512x8 base
Who it fits
Good fit for
You should choose this kit if you own a Synology NAS from the 18, 19, or 20 series that requires a 4GB DDR4-2666 upgrade. It is ideal for users needing a drop-in replacement for a failed or insufficient memory module. The non-ECC specification matches the requirements of these consumer-grade NAS units. If you need to expand storage capacity by adding more RAM to your Synology RS820+ or DS220+ without complex configuration, this specific 4GB stick is the correct physical and electrical match for your system.
Who should skip it
Skip this product if your NAS requires ECC memory. This module is explicitly Non-ECC. It will not work in servers or high-end units that demand error correction. Also avoid it if you need more than 4GB of total system memory. You will need to purchase multiple units or look for 8GB kits. Do not use this in desktop computers expecting standard DIMM slots, as this is a SODIMM. The 260-pin format is distinct from the 288-pin standard desktop DDR4 sticks.
Verdict: This Timetec module is a precise spec-match for compatible Synology NAS units. It offers the exact capacity and speed required for those specific models.
Timetec 4GB DDR4-2666 Key Specs
Memory Speed: 2666MHz
This rating tells you how fast the memory transfers data. A speed of 2666MHz is standard for many modern NAS units, including the Synology DS920+ and RS820+. You should match this speed to your NAS requirements to avoid bottlenecking performance. If your device supports lower speeds, this stick will still work but may run slower. Always check your NAS manual to ensure compatibility with this specific frequency for optimal operation.
Form Factor: SODIMM
SODIMM stands for Small Outline Dual In-line Memory Module. This physical form factor is smaller than standard desktop DIMMs, designed specifically for laptops and compact devices like NAS drives. You must ensure your Synology unit uses SODIMM slots, as standard desktop RAM will not fit. This compact size allows for tighter internal layouts in network-attached storage systems while maintaining reliable connectivity for data access.
ECC Support: Non-ECC
Non-ECC means the memory does not include Error Correction Code capabilities. This is typical for consumer-grade NAS models like the DS220+ or DS720+. While ECC memory prevents data corruption in servers, most home NAS users do not need it. This specification confirms the stick is suitable for standard home office or media server setups where cost efficiency is prioritized over enterprise-grade data integrity features.
Size: 2666MHz 4GB
This indicates you get 4GB of total memory capacity running at 2666MHz. This capacity is sufficient for basic file serving or light media streaming tasks. If you plan to run multiple virtual machines or heavy Docker containers, you might need more RAM. This specific size helps you determine if a single stick is enough or if you need to purchase additional modules to double your available memory for better multitasking.
Physical Design And Build Details
The Timetec module measures 3.74 inches in length, 1.77 inches in height, and 0.24 inches in width. These dimensions match the standard SODIMM form factor required for your NAS. The listing describes the PCB color as gold. This finish is typical for memory modules and does not affect performance. It simply indicates the base metal of the circuit board.
You are looking at a single-rank, non-ECC stick. This layout means the memory chips are arranged on one side of the board. Non-ECC memory does not check for data errors. This is standard for consumer and small business NAS devices. The module operates at 1.2V. This voltage is lower than older DDR3 standards. It helps keep your NAS running cooler and uses less power.
According to the listing, this unit is a direct replacement for the Synology D4NESO-2666-4G. The physical shape and pin count must align with your existing slot. The 260-pin design ensures it fits only into DDR4 SODIMM slots. You do not need to worry about forcing it into incompatible slots. The compact size allows it to sit flat on the motherboard. This reduces the risk of interference with nearby components or drive bays.
Setup And Daily Use Guide
Upgrading your NAS with this module is straightforward because it is designed as a direct replacement for the Synology D4NESO-2666-4G part. You do not need special drivers or configuration software. The module is a standard SODIMM with 260 pins, fitting into the memory slots of compatible Synology units. It operates at 1.2V and uses non-ECC technology, which means it lacks error-correcting code. This is typical for consumer and prosumer NAS devices. The memory runs at 2666MHz. This speed matches the requirements of your NAS, ensuring stable data transfer without bottlenecks. It is a single-rank stick with a 1Rx8 configuration. This structure is compatible with the listed models, including the RS820RP+, DS920+, and DS1618+. You simply power down your NAS, insert the stick into the available slot, and restart. The system will detect the new 4GB capacity automatically. In daily use, the module provides the advertised 4GB of storage. It supports the 20 series, 19 series, and select 18 series Synology devices. The gold-colored PCB is standard for this form factor. The product comes with a lifetime warranty from the purchase date. This coverage includes free technical support based in the United States. This support can help if you encounter installation questions or compatibility doubts. The module is not for systems requiring ECC memory, such as some enterprise servers. It is strictly for the specified NAS models. Ensure your NAS firmware is up to date before installation for best results. The physical dimensions are 3.74 by 1.77 by 0.24 inches, fitting standard slots without issue.
Before You Buy This Kit
You must verify your NAS model first. This module fits 20 series units like the RS820RP+ and DS920+. It also works with 19 series models such as the DS2419+ and DVA3219. The 18 series DS1618+ is also supported. Do not assume it fits every Synology device. Check your specific model number against the list. You need to ensure your system supports 2666MHz DDR4 SODIMMs. This is a non-ECC stick. If your NAS requires ECC memory, this part will not work. You should also check if you need a kit. Other options include 8GB kits. If you plan to add more RAM later, buying a matched pair might be easier. Keep your original module if you plan to downgrade. This part is a direct replacement for the Synology D4NESO-2666-4G. It does not require special drivers. Just install it and restart your NAS.
Check before you buy
- Verify your NAS model is on the compatible list
- Confirm your system supports non-ECC DDR4 memory
- Check if you need a single stick or a kit
- Ensure your current RAM is not ECC type
The product at a glance
Timetec 4GB DDR4-2666 SODIMM
Best for: Synology NAS users needing a 4GB replacement
- Total Capacity
- 4GB
- Memory Speed
- 2666MHz
- CAS Latency
- CL19
- Voltage
- 1.2V
- Module Configuration
- 1x4GB
- Form Factor
- SODIMM
View on Amazon: Timetec 4GB DDR4-2666 SODIMM Affiliate link
This Timetec module is a 4GB DDR4-2666 SODIMM designed as a direct replacement for specific Synology NAS units. It operates at 1.2V with CL19 latency and uses Non-ECC Unbuffered memory. The gold-colored stick fits 20, 19, and 18 series models like the RS820RP+ and DS920+. You get a lifetime warranty and US-based support. It suits users needing a simple, compatible upgrade for older NAS hardware.
Pros
- DDR4-2666 speed with PC4-21300 rating
- Compatible with multiple Synology 18, 19, and 20 series models
- Non-ECC Unbuffered SODIMM form factor
- Lifetime warranty from purchase date
Cons
- Only 4GB capacity limits expansion potential
- Non-ECC memory lacks error correction
- Single Rank 1Rx8 configuration
Good fit if
- You need a direct replacement for Synology D4NESO-2666-4G
- You own a compatible 20, 19, or 18 series NAS
- You want a lifetime warranty on the module
Skip if
- You require ECC memory for data integrity
- You need more than 4GB of RAM
- Your NAS model is not in the compatible list
Verdict: Timetec DDR4-2666 4GB SODIMM fits owners of specific Synology NAS units needing a straightforward 4GB upgrade. It is a practical replacement for the original D4NESO-2666-4G module.
Specifications side by side
| Spec | Timetec 4GB DDR4-2666 SODIMM |
|---|---|
| Total Capacity | 4GB |
| Memory Speed | 2666MHz |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| Module Configuration | 1x4GB |
| Form Factor | SODIMM |
| ECC Support | Non-ECC |
| Dimensions | 3.74 × 0.24 × 1.77 inches |
| Size | 2666MHz 4GB |
| Color | Gold |
Frequently asked questions
Is this Timetec module compatible with my Synology NAS?
This module is designed for specific Synology units. It fits 20 series models like the RS820RP+ and DS920+. It also works with 19 series devices such as the DS2419+ and DVA3219. The 18 series DS1618+ is supported. You must verify your exact model number before purchasing to ensure a proper fit.
Does this RAM stick support ECC?
No, this Timetec DDR4-2666 4GB SODIMM does not support ECC. It is a non-ECC module. This design choice aligns with its role as a replacement for the original Synology D4NESO-2666-4G part. Most consumer-grade Synology NAS units do not require ECC memory for standard operation.
What is the physical size of this memory module?
The module measures 3.74 inches in length, 1.77 inches in height, and 0.24 inches in width. It uses the standard SODIMM form factor. These dimensions ensure it fits into the dedicated memory slots found in compatible Synology NAS chassis without requiring any modification to the case.
Can I use this for a PC instead of a NAS?
While it is a standard DDR4 SODIMM, this product is explicitly marketed for Synology NAS upgrades. It is rated for 2666MHz and operates at 1.2V. You should check your PC motherboard’s supported memory list to confirm compatibility, as NAS memory and PC memory have different stability requirements.
Is this a direct replacement for the original Synology part?
Yes, this Timetec module serves as a direct replacement for the Synology D4NESO-2666-4G. It matches the original specifications, including the 4GB capacity and 2666MHz speed. This allows you to upgrade or replace faulty memory without worrying about compatibility issues with your NAS firmware.
What voltage does this RAM operate at?
This memory module operates at 1.2V. This is the standard voltage for DDR4 SODIMM modules. Operating at this voltage helps ensure energy efficiency and thermal stability within your Synology NAS. It is important to use modules that match your system’s voltage requirements for optimal performance.