Best DDR4 RAMS with 1.35V: 15 Spec-Based Picks
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Finding the best ddr4 RAMs with 1 35v requires matching memory speed, latency, and module clearance to your system. We compared 15 products based strictly on specifications published on the product listings.
The G.SKILL Trident Z RGB 16GB DDR4 RAM Kit leads because it delivers 3000MHz speed with CL16 latency for stable dual-channel desktop operation. This guide helps you choose the right capacity, memory frequency, and module height for your PC build.
Quick picks
The best fit for you
- You want balanced 3000MHz speed with RGB lighting G.SKILL Trident Z RGB 16GB DDR4 RAM Kit It provides 16GB at 3000MHz with CL16 timings at 1.35V.
- You need low clearance for compact PC cases Corsair Vengeance LPX 16GB DDR4 3000MHz Its low-profile 34mm form factor fits tight spaces while running at CL15 latency.
- You require maximum memory capacity for your workstation G.SKILL Ripjaws V 64GB DDR4 3200MHz RAM It supplies a dense 64GB four-module configuration running at 3200MHz and 1.35V.
- You want the fastest memory clock rate listed G.SKILL Trident Z RGB 16GB 3600MHz RAM It delivers the highest speed on this list at 3600MHz at 1.35V.
Our 15 picks
G.SKILL Trident Z RGB 16GB DDR4 RAM Kit
Best for: desktop builders needing balanced 1.35V DDR4 operation
- Voltage
- 1.35V (what this guide is about)
- Total Capacity
- 16GB
- Memory Speed
- 3000MT/s
- CAS Latency
- CL16
- Module Configuration
- 2x8GB
- Form Factor
- U-DIMM
This G.SKILL dual-channel kit provides 16GB of DDR4 memory across two 8GB modules. Operating at 1.35V with Intel XMP support, it reaches speeds up to 3000MT/s with CL16-18-18-38 timings. It suits desktop users who want dependable DDR4 performance without exceeding standard 1.35V voltage limits, while leaving room for systems configured for dual-channel throughput.
Pros
- Operates at 1.35V using an Intel XMP profile
- Matched 2x8GB setup enables dual-channel memory bandwidth
- Runs at 3000MT/s with CL16 CAS latency
Cons
- Peak speed of 3000MT/s falls below 3200MT/s and 3600MT/s alternatives
- Module height of 1.7 inches may interfere with tight CPU cooler clearance
Good fit if
- You need a 1.35V 16GB memory kit for an Intel or AMD desktop build.
- You want pre-configured Intel XMP settings for a 3000MT/s configuration.
Skip if
- You require memory speeds higher than 3000MT/s.
- You use a compact CPU heatsink requiring modules shorter than 1.7 inches.
Verdict: G.SKILL Trident Z RGB 16GB DDR4 RAM provides 1.35V dual-channel operation for PC builders who prioritize stable 3000MT/s desktop performance.
Corsair Vengeance LPX 16GB DDR4 3000MHz
Best for: compact PC builds requiring low-profile clearance
- Voltage
- 1.35V (what this guide is about)
- Total Capacity
- 16GB
- Memory Speed
- 3000MHz
- CAS Latency
- CL15
- Module Configuration
- 2x8GB
- Height
- 34mm
This Corsair Vengeance LPX kit gives you 16GB of DDR4 memory split across two 8GB modules. It operates at 3000MHz with CL15 latency at 1.35V and supports Intel XMP 2.0. With a low-profile height of 34mm and an aluminum heatspreader, it suits compact desktop builds where space under large CPU coolers is tight.
Pros
- Low-profile 34mm height fits small-form-factor builds
- CL15 CAS latency at 3000MHz memory speed
- Intel XMP 2.0 support for one-setting configuration
- Solid aluminum heatspreader for thermal dissipation
Cons
- Clock speed tops out at 3000MHz
- Capacity is limited to 16GB across two modules
- Does not include RGB lighting
Good fit if
- You need 34mm low-clearance modules to fit beneath a CPU cooler.
- You want CL15 latency on a 1.35V dual-channel configuration.
- You build in a small-form-factor desktop case.
Skip if
- You need 3200MHz or 3600MHz clock speeds.
- You require 32GB or 64GB of total system memory.
- You want integrated RGB lighting on your modules.
Verdict: Corsair Vengeance LPX 16GB 3000MHz DDR4 RAM fits desktop builders who need low 34mm clearance alongside CL15 latency. It suits compact enclosures where oversized heatsinks interfere with cooling hardware.
Corsair Vengeance LPX 16GB DDR4 3200MHz
Best for: compact desktop builds needing low-profile clearance
- Voltage
- 1.35V (what this guide is about)
- Total Capacity
- 16GB
- Memory Speed
- 3200MHz
- CAS Latency
- CL16
- Module Configuration
- 2x8GB
- Height
- 34mm
This Corsair Vengeance LPX kit gives you 16GB of desktop memory across two 8GB modules. It operates at 3200MHz with CL16 latency under 1.35V using Intel XMP 2.0. With a low-profile module height of 34mm, it fits under large CPU air coolers. It suits desktop builders who need reliable dual-channel bandwidth in compact spaces.
Pros
- Low 34mm profile fits compact cases and tight CPU coolers
- Configured for 3200MHz at 1.35V with CL16 timing
- Intel XMP 2.0 support simplifies memory frequency setup
- Solid aluminum heatspreader manages module temperatures
Cons
- Total 16GB capacity offers less headroom than 32GB or 64GB kits
- CL16 latency is slightly looser than CL15 alternatives
- Heatspreader design lacks integrated RGB lighting
Good fit if
- You need low-profile RAM to clear a bulky CPU cooler
- You want 3200MHz dual-channel DDR4 memory running at 1.35V
- You prefer simple frequency tuning via Intel XMP 2.0
Skip if
- You need 32GB or 64GB of RAM for heavy productivity tasks
- You want integrated RGB illumination inside your case
- You require tighter CL15 latency for your memory workload
Verdict: Corsair Vengeance LPX 16GB 3200MHz DDR4 RAM serves small-form-factor PC builders who require low 34mm clearances alongside standard 1.35V dual-channel speeds.
G.SKILL Ripjaws V 16GB (2x8GB) 3200MHz DDR4 RAM
Best for: Desktop builds needing dual-channel 16GB 3200MT/s memory
- Voltage
- 1.35V (what this guide is about)
- Total Capacity
- 16GB
- Memory Speed
- 3200MT/s
- CAS Latency
- CL16
- Module Configuration
- 2x8GB
- Form Factor
- U-DIMM
View on Amazon: G.SKILL Ripjaws V 16GB (2x8GB) 3200MHz DDR4 RAM
This G.SKILL Ripjaws V kit provides 16GB of desktop memory divided across two 8GB modules. Operating at 1.35V, it delivers a transfer speed of 3200MT/s with CL16-18-18-38 latency. It features an Intel XMP profile to configure rated settings on compatible motherboards. If you are assembling a standard desktop, this dual-channel setup covers your primary memory requirements.
Pros
- Operates at 3200MT/s speed using 1.35V
- Balanced dual-channel 2x8GB module configuration
- Includes Intel XMP profile for BIOS configuration
- Standard 288-pin desktop U-DIMM form factor
Cons
- Total capacity is limited to 16GB
- Module height of 1.73 inches requires physical clearance check
- Non-ECC design excludes error-correcting server support
Good fit if
- You want a two-module 16GB configuration running at 3200MT/s.
- You use a desktop motherboard that supports 1.35V Intel XMP profiles.
- You prefer standard CL16 latency for general computing and gaming.
Skip if
- You require 32GB or 64GB of RAM for heavier workloads.
- You need ECC memory for workstation or server platforms.
- You want memory modules with factory speeds higher than 3200MT/s.
Verdict: G.SKILL Ripjaws V 16GB 3200MT/s DDR4 RAM gives desktop builders a reliable 2x8GB dual-channel setup running at 1.35V with CL16 timings.
G.SKILL Ripjaws V 16GB DDR4 3200MHz UDIMM
Best for: Single-module desktop setups planned for future upgrades
- Voltage
- 1.35V (what this guide is about)
- Total Capacity
- 16GB
- Memory Speed
- 3200MT/s
- CAS Latency
- CL16
- Module Configuration
- 1x16GB
- Form Factor
- U-DIMM
This G.SKILL Ripjaws V module gives you 16GB of DDR4 memory on a single 288-pin U-DIMM stick. It operates at 3200MT/s with CL16 latency and requires 1.35V using Intel XMP. It suits you if your desktop motherboard has limited DIMM slots or if you plan to expand your total system memory later without discarding existing modules.
Pros
- Single 16GB stick preserves open DIMM slots for future capacity upgrades
- Runs at 3200MT/s with CL16 latency at 1.35V
- Includes Intel XMP overclock profile alongside standard JEDEC defaults
Cons
- Single-module configuration does not provide dual-channel memory bandwidth by itself
- Non-ECC design excludes error-correcting workstation setups
Good fit if
- You want a single 16GB module to leave room for future memory expansion.
- You need 3200MT/s DDR4 desktop memory rated for 1.35V operation.
Skip if
- You want out-of-the-box dual-channel bandwidth from a two-stick kit.
- You require ECC support for specialized workstation hardware.
Verdict: G.SKILL Ripjaws V 16GB 3200MT/s DDR4 RAM provides 3200MT/s speed on a single 1.35V module for desktop builders who prioritize open memory slots over immediate dual-channel bandwidth.
G.SKILL Ripjaws V 64GB DDR4 3200MHz RAM
Best for: high-capacity four-slot desktop builds
- Voltage
- 1.35V (what this guide is about)
- Total Capacity
- 64GB
- Memory Speed
- 3200MT/s
- CAS Latency
- CL16
- Module Configuration
- 4x16GB
- Form Factor
- U-DIMM
This G.SKILL Ripjaws V memory kit delivers 64GB of total system memory across four matched 16GB desktop modules. It operates at 3200MT/s with CL16 latency under 1.35V using an Intel XMP profile. If you run memory-heavy desktop workloads or multitasking setups that require maximum capacity across four motherboard slots, this kit gives you high density without changing voltage standards.
Pros
- Large 64GB total capacity across four 16GB modules
- 3200MT/s speed with CL16 CAS latency
- Standard 1.35V operation with Intel XMP profile support
- Matched four-stick kit configured to run together
Cons
- Occupies four motherboard slots, leaving no room for future expansion
- Non-ECC specification lacks error correction
Good fit if
- You need 64GB of total memory for high-capacity desktop computing.
- You have a desktop motherboard with four available 288-pin DDR4 slots.
- You want 3200MT/s performance configured through an Intel XMP profile.
Skip if
- You own a motherboard with only two memory slots.
- You require ECC memory for workstation error handling.
Verdict: G.SKILL Ripjaws V 64GB DDR4-3200 RAM Kit fits power users and workstation builders who need a dense 64GB quad-module memory configuration running at 1.35V.
G.SKILL Ripjaws V 16GB (2x8GB) DDR4 3200MHz
Best for: Dual-channel 3200MT/s desktop PC setups
- Voltage
- 1.35V (what this guide is about)
- Total Capacity
- 16GB
- Memory Speed
- 3200MT/s
- CAS Latency
- CL16
- Module Configuration
- 2x8GB
- Form Factor
- U-DIMM
This G.SKILL memory kit gives you 16GB of DDR4 desktop memory across two matched 8GB modules. It operates at 3200MT/s with CL16 timings at 1.35V using an Intel XMP profile. You get standard 288-pin U-DIMM modules with a red heat spreader. It suits desktop builders who want dual-channel 3200MT/s operation without manual timing adjustments.
Pros
- Operates at 3200MT/s with CL16-18-18-38 timings at 1.35V
- Pre-configured Intel XMP profile enables rated speeds in compatible BIOS setups
- Dual-channel package includes two matched 8GB non-ECC modules
- Standard 288-pin U-DIMM form factor fits desktop PC motherboards
Cons
- Reverts to lower JEDEC default SPD speed unless configured in BIOS
- Total capacity is limited to 16GB across two DIMM slots
- Non-ECC design provides no error-checking functionality
Good fit if
- You want a 16GB dual-channel kit operating at 3200MT/s and 1.35V.
- You use a desktop motherboard that supports 288-pin DDR4 U-DIMMs and Intel XMP.
Skip if
- You need 32GB or higher capacity for memory-heavy workstation applications.
- You require error-correcting code memory for server platforms.
Verdict: G.SKILL RipjawsV 16GB 3200MT/s DDR4 RAM fits desktop users seeking a matched dual-channel upgrade operating at 3200MT/s via Intel XMP. It delivers standard CL16 latency at 1.35V in a standard 288-pin form factor.
G.SKILL Ripjaws V 16GB DDR4-3000 Kit
Best for: desktop systems needing CL15 3000MT/s memory
- Voltage
- 1.35V (what this guide is about)
- Total Capacity
- 16GB
- Memory Speed
- 3000MT/s
- CAS Latency
- CL15
- Module Configuration
- 2x8GB
- Form Factor
- U-DIMM
This dual-channel 16GB kit gives you two 8GB DDR4 modules operating at 3000MT/s with 1.35V. It features CL15-16-16-35 latency timings and an Intel XMP profile for motherboard setup. Designed as 288-pin non-ECC UDIMM memory, it suits desktop builders who want tighter CAS 15 timings at standard 3000MT/s speeds without RGB lighting.
Pros
- CL15-16-16-35 CAS latency timings
- Pre-configured Intel XMP profile
- Matched 2x8GB dual-channel configuration
- Operates at 3000MT/s at 1.35V
Cons
- Clock rate tops out at 3000MT/s
- Kit capacity is limited to 16GB total
- Does not include RGB lighting
Good fit if
- You want a 16GB kit with tight CL15 latency timings.
- You run a desktop motherboard supporting Intel XMP at 1.35V.
Skip if
- You need higher transfer speeds such as 3200MT/s or 3600MT/s.
- You require 32GB or more system memory for your tasks.
Verdict: G.SKILL Ripjaws V 16GB 3000MT/s DDR4 RAM delivers tight CL15 timings and plug-and-play XMP configuration for users building standard dual-channel DDR4 desktop systems.
G.SKILL Trident Z RGB 16GB DDR4-3200 RAM Kit
Best for: desktop builders wanting 16GB RGB memory
- Voltage
- 1.35V (what this guide is about)
- Total Capacity
- 16GB
- Memory Speed
- 3200MT/s
- CAS Latency
- CL16
- Module Configuration
- 2x8GB
- Form Factor
- U-DIMM
View on Amazon: G.SKILL Trident Z RGB 16GB DDR4-3200 RAM Kit
This 16GB kit gives you two 8GB DDR4 modules operating at 3200MT/s with CL16 latency. It uses an Intel XMP profile running at 1.35V for desktop systems. The 1.73-inch module height accommodates integrated RGB lighting. It suits you if you need standard dual-channel capacity with XMP speed for mainstream gaming or daily desktop tasks.
Pros
- Rated for 3200MT/s operation with CL16-18-18-38 timings
- Pre-configured Intel XMP overclock profile at 1.35V
- Dual-channel kit featuring two 8GB 288-pin UDIMMs
- Integrated RGB light diffuser across both modules
Cons
- Module height of 1.73 inches limits clearance under large CPU air coolers
- 16GB capacity provides less headroom than 32GB or 64GB options
- Non-ECC design provides no hardware data error correction
Good fit if
- You want a 16GB dual-channel DDR4 setup rated at 3200MT/s and 1.35V.
- You have adequate physical space for 1.73-inch tall heatspreaders.
- You plan to enable Intel XMP profiles in your desktop BIOS.
Skip if
- You need 32GB or more memory for high-capacity multitasking.
- You use a compact case or cooler requiring low-profile modules.
- You require ECC memory for specialized workstation hardware.
Verdict: G.SKILL Trident Z RGB 16GB 3200MT/s DDR4 RAM delivers dual-channel 3200MT/s performance at 1.35V for desktop builders who want RGB aesthetics and have at least 1.73 inches of cooler clearance.
Corsair Vengeance LPX 16GB DDR4-3000 RAM
Best for: compact PC builds needing low-profile memory
- Voltage
- 1.35V (what this guide is about)
- Total Capacity
- 16GB
- Memory Speed
- 3000MHz
- CAS Latency
- C16
- Module Configuration
- 2x8GB
- Form Factor
- Desktop
This kit gives you 16GB of DDR4 memory split across two 8GB sticks. It runs at a 3000MHz clock speed with CL16 latency at 1.35V, configured via Intel XMP 2.0. With a low-profile height of 34mm and an aluminum heatspreader, it suits you if you need desktop memory designed to clear CPU coolers in tight builds.
Pros
- Low 34mm module height fits compact cases and tight cooler clearances
- Solid aluminum heatspreader manages heat dissipation
- Intel XMP 2.0 support enables straightforward profile setup
- Backed by a limited lifetime warranty
Cons
- Speed tops out at 3000MHz, below the 3200MHz and 3600MHz options on the list
- Features CL16 latency instead of tighter CL15 timings found on comparable 3000MHz kits
- Does not include integrated RGB lighting
Good fit if
- You build in small-form-factor cases requiring 34mm low-profile memory height.
- You want a straightforward 16GB dual-channel setup running at 3000MHz and 1.35V.
- You prefer functional aluminum heatspreaders without extra lighting hardware.
Skip if
- You want higher memory speeds such as 3200MHz or 3600MHz.
- You need more than 16GB of total system capacity.
- You want customizable RGB lighting on your RAM sticks.
Verdict: Corsair Vengeance LPX 16GB Low-Profile DDR4-3000 fits builders assembling compact systems that require low-clearance 34mm modules operating at 1.35V.
Corsair Vengeance RGB Pro 16GB 3200MHz DDR4
Best for: desktop setups needing addressable RGB lighting
- Voltage
- 1.35V (what this guide is about)
- Total Capacity
- 16GB
- Memory Speed
- 3200MHz
- CAS Latency
- CL16
- Module Configuration
- 2x8GB
- Height
- 2 inches
This kit gives you 16GB of desktop memory across two 8GB modules running at 3200MHz with CL16 latency and 1.35V. It features aluminum heat spreaders with ten individually addressable RGB LEDs per stick, controlled through iCUE software. It suits builders seeking standard dual-channel DDR4 performance paired with synchronized system lighting on Intel or AMD platforms.
Pros
- Ten individually addressable RGB LEDs per module with iCUE support
- Supports Intel XMP 2.0 profile at 1.35V and 3200MHz
- Aluminum heat spreader aids passive thermal management
Cons
- Module height of 2 inches can limit CPU cooler clearance
- 16GB capacity provides less headroom than 32GB or 64GB kits
- Memory frequency is capped at 3200MHz rather than 3600MHz
Good fit if
- You want customizable 10-LED RGB lighting configured through Corsair iCUE.
- You need a dual-channel 16GB kit running at 3200MHz CL16-18-18-36.
- You have adequate space inside your desktop case for 2-inch tall modules.
Skip if
- You require low-profile RAM to fit beneath large air cooler heatsinks.
- You need 32GB or 64GB of memory for demanding computing tasks.
- You want higher transfer rates such as DDR4-3600.
Verdict: Corsair Vengeance RGB Pro 16GB DDR4-3200 delivers standard 1.35V dual-channel speed with programmable multi-zone lighting for mid-range Intel and AMD desktop systems. Choose this kit if your PC chassis accommodates its 2-inch height and you prioritize synchronized iCUE illumination.
G.SKILL Trident Z RGB 32GB DDR4 RAM
Best for: dual-channel 32GB desktop gaming builds
- Voltage
- 1.35V (what this guide is about)
- Total Capacity
- 32GB
- Memory Speed
- 3200MT/s
- CAS Latency
- CL16
- Module Configuration
- 2x16GB
- Form Factor
- U-DIMM
This G.SKILL kit gives you 32GB of DDR4 memory across two 16GB modules running at 3200MT/s and 1.35V. It features CL16 timings and supports Intel XMP profiles for setup. It suits you if you need double the capacity of common 16GB kits for gaming or multitasking on a compatible desktop motherboard.
Pros
- 32GB total capacity across two matched 16GB modules
- Runs at 3200MT/s with CL16 latency at 1.35V
- Includes Intel XMP profile for overclocking setup
Cons
- Module height of 1.73 inches can restrict clearance under large air coolers
- Non-ECC design limits use to standard desktop systems
Good fit if
- You want 32GB of memory across two slots to leave room for future upgrades.
- You run a motherboard supporting 3200MT/s via Intel XMP.
Skip if
- You need low-profile RAM to clear an overhang on your CPU cooler.
- You require ECC support for specialized workstation hardware.
Verdict: G.SKILL Trident Z RGB 32GB DDR4-3200 RAM fits desktop builders seeking 32GB of dual-channel memory with CL16 latency. It gives gamers and heavy multitaskers ample capacity while leaving two DIMM slots open.
G.SKILL Trident Z RGB 16GB 3600MHz RAM
Best for: Desktop users targeting 3600MT/s speeds at 1.35V
- Voltage
- 1.35V (what this guide is about)
- Total Capacity
- 16GB
- Memory Speed
- 3600MT/s
- CAS Latency
- CL18
- Module Configuration
- 2x8GB
- Form Factor
- U-DIMM
This G.SKILL Trident Z RGB dual-channel memory kit provides 16GB total capacity across two 8GB desktop modules. It operates at 3600MT/s with CL18-22-22-42 timings at 1.35V using an Intel XMP profile. If you want faster 3600MT/s transfer speeds for your desktop build and do not require higher memory capacity, this 288-pin U-DIMM kit fits your system.
Pros
- Reaches 3600MT/s using Intel XMP profile at 1.35V
- Two-stick 16GB (2x8GB) configuration enables dual-channel memory mode
- Includes JEDEC default boot profile alongside XMP overclock settings
Cons
- Looser CAS latency of CL18-22-22-42 compared to CL15 and CL16 kits
- Total capacity is limited to 16GB across two modules
- Full 3600MT/s speed requires manual BIOS or XMP configuration
Good fit if
- You want 3600MT/s transfer speed at 1.35V on a desktop motherboard.
- You need a 16GB dual-module configuration for standard desktop tasks and gaming.
Skip if
- You need tighter CL15 or CL16 memory timings rather than CL18.
- You require 32GB or more memory capacity for heavy multitasking or production work.
Verdict: G.SKILL Trident Z RGB 16GB 3600MHz RAM Kit fits PC builders who prioritize 3600MT/s data transfer rates at 1.35V over tight CL15 or CL16 timings.
G.SKILL Ripjaws V 16GB 3000MHz DDR4 RAM
Best for: 16GB desktop setups running 3000MT/s memory speeds
- Voltage
- 1.35V (what this guide is about)
- Total Capacity
- 16GB
- Memory Speed
- 3000MT/s
- CAS Latency
- CL16
- Module Configuration
- 2x8GB
- Form Factor
- U-DIMM
This G.SKILL Ripjaws V dual-channel desktop memory kit provides 16GB of capacity across two 8GB modules. Operating at 1.35V, it supports speeds up to 3000MT/s using Intel XMP profiles with CL16-18-18-38 timings. It fits standard 288-pin desktop motherboards. You will find it suitable if you need reliable dual-channel DDR4 performance without higher memory frequencies.
Pros
- Dual-channel 16GB kit (2x8GB modules)
- Intel XMP profile support for 3000MT/s operation at 1.35V
- Standard 288-pin UDIMM form factor for desktop builds
- Tested CAS latency of CL16-18-18-38
Cons
- Rated at 3000MT/s, lower than 3200MT/s and 3600MT/s options
- Looser timings than CL15 3000MT/s memory kits
- Non-ECC design limits use to standard desktop systems
Good fit if
- You want a 16GB dual-channel setup using two matched 8GB sticks.
- You have a desktop motherboard supporting Intel XMP overclock profiles.
- You run hardware matched to 3000MT/s DDR4 memory speeds.
Skip if
- You need higher bandwidth kits running at 3200MT/s or 3600MT/s.
- You require 32GB or 64GB of total system RAM.
- You build a system requiring error-correcting ECC memory.
Verdict: G.SKILL Ripjaws V 16GB (2x8GB) DDR4 3000MHz delivers a matched 16GB dual-stick setup at 1.35V for desktop builders needing standard 3000MT/s throughput. It serves mainstream PC users pairing XMP-compatible motherboards with entry-to-mid DDR4 speed requirements.
Silicon Power Turbine 16GB (2x8GB) 3200MHz DDR4 RAM
Best for: 1.35V dual-channel 16GB desktop builds
- Voltage
- 1.35V (what this guide is about)
- Total Capacity
- 16GB
- Memory Speed
- 3200MHz
- CAS Latency
- CL16
- Module Configuration
- 2x8GB
- Form Factor
- UDIMM
View on Amazon: Silicon Power Turbine 16GB (2x8GB) 3200MHz DDR4 RAM
This Silicon Power kit delivers 16GB of DDR4 desktop memory across two 8GB modules. It operates at 3200MHz using 1.35V with CL16-18-18-38 timings, supported by Intel XMP. You get an aluminum heat sink for thermal control and a lifetime warranty. It suits desktop setups where you need dual-channel memory running at standard 1.35V specifications.
Pros
- Rated for 3200MHz speeds with CL16 latency
- Aluminum heat sink for thermal dissipation
- Supports Intel XMP standard for setup
- Backed by a lifetime warranty
Cons
- Looser tRAS timing of 38 compared to 35 or 36
- Kit capacity is limited to 16GB across two slots
- Blue heat sink design includes no RGB illumination
Good fit if
- You need a 16GB dual-channel setup running at 3200MHz and 1.35V.
- You want an aluminum heat spreader without lighting components.
- You use an Intel system that supports XMP configuration.
Skip if
- You require 32GB or 64GB of RAM for heavier workloads.
- You want tighter baseline timings than 16-18-18-38.
Verdict: Silicon Power Turbine 16GB 3200MHz DDR4 RAM gives you a standard 2x8GB dual-channel setup with an aluminum heat sink for 1.35V desktop builds.
Specifications side by side
| Spec | G.SKILL Trident Z RGB 16GB DDR4 RAM Kit | Corsair Vengeance LPX 16GB DDR4 3000MHz | Corsair Vengeance LPX 16GB DDR4 3200MHz | G.SKILL Ripjaws V 16GB (2x8GB) 3200MHz DDR4 RAM | G.SKILL Ripjaws V 16GB DDR4 3200MHz UDIMM | G.SKILL Ripjaws V 64GB DDR4 3200MHz RAM | G.SKILL Ripjaws V 16GB (2x8GB) DDR4 3200MHz | G.SKILL Ripjaws V 16GB DDR4-3000 Kit | G.SKILL Trident Z RGB 16GB DDR4-3200 RAM Kit | Corsair Vengeance LPX 16GB DDR4-3000 RAM | Corsair Vengeance RGB Pro 16GB 3200MHz DDR4 | G.SKILL Trident Z RGB 32GB DDR4 RAM | G.SKILL Trident Z RGB 16GB 3600MHz RAM | G.SKILL Ripjaws V 16GB 3000MHz DDR4 RAM | Silicon Power Turbine 16GB (2x8GB) 3200MHz DDR4 RAM |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Total Capacity | 16GB | 16GB | 16GB | 16GB | 16GB | 64GB | 16GB | 16GB | 16GB | 16GB | 16GB | 32GB | 16GB | 16GB | 16GB |
| Memory Speed | 3000MT/s | 3000MHz | 3200MHz | 3200MT/s | 3200MT/s | 3200MT/s | 3200MT/s | 3000MT/s | 3200MT/s | 3000MHz | 3200MHz | 3200MT/s | 3600MT/s | 3000MT/s | 3200MHz |
| CAS Latency | CL16 | CL15 | CL16 | CL16 | CL16 | CL16 | CL16 | CL15 | CL16 | C16 | CL16 | CL16 | CL18 | CL16 | CL16 |
| Voltage | 1.35V | 1.35V | 1.35V | 1.35V | 1.35V | 1.35V | 1.35V | 1.35V | 1.35V | 1.35V | 1.35V | 1.35V | 1.35V | 1.35V | 1.35V |
| Module Configuration | 2x8GB | 2x8GB | 2x8GB | 2x8GB | 1x16GB | 4x16GB | 2x8GB | 2x8GB | 2x8GB | 2x8GB | 2x8GB | 2x16GB | 2x8GB | 2x8GB | 2x8GB |
| Form Factor | U-DIMM | not specified | not specified | U-DIMM | U-DIMM | U-DIMM | U-DIMM | U-DIMM | U-DIMM | Desktop | not specified | U-DIMM | U-DIMM | U-DIMM | UDIMM |
| ECC Support | Non-ECC | not specified | not specified | Non-ECC | Non-ECC | Non-ECC | Non-ECC | Non-ECC | Non-ECC | not specified | not specified | Non-ECC | Non-ECC | Non-ECC | not specified |
| Height | 1.7 inches | 34mm | 34mm | not specified | not specified | not specified | not specified | 0.5 inches | 1.73 inches | 34mm | 2 inches | 1.73 inches | not specified | not specified | not specified |
| Compatible Device | Desktop, PC | Desktop, PC | Desktop, PC | Desktop, PC | Desktop, PC | Desktop, PC | Desktop, PC | Desktop, PC | Desktop, PC | Desktop, PC | Desktop, PC | Desktop, PC | Desktop, PC | Desktop, PC | Desktop |
| Size | 16GB | 16GB Kit (2x8GB) | 16GB Kit (2x8GB) | 16GB (2x8GB) | 16GB | 64GB | 16GB (2x8GB) | 16GB | 16GB (2x8GB) | 16GB Kit (2x8GB) | 16GB (2x8GB) | 32GB (2x16GB) | 16GB | 16GB | 2x8GB 3200MHz CL16 |
| Dimensions | 5.2 × 0.67 × 1.7 inches | 6.74 × 3.55 × 0.61 inches | 6.1 × 3.54 × 0.39 inches | 5.24 × 0.28 × 1.73 inches | 3.94 × 3.94 × 3.94 inches | 5.51 × 1.57 × 0.39 inches | 5.4 × 0.55 × 0.17 inches | 7.2 × 5.2 × 0.5 inches | 5.31 × 0.31 × 1.73 inches | 5.31 × 0.28 × 1.32 inches | 5.44 × 0.3 × 2 inches | 5.31 × 0.31 × 1.73 inches | 3.94 × 1.57 × 0.39 inches | not specified | 7 × 4.5 × 0.5 inches |
| Weight | 4.8 ounces | 3.21 ounces | 3.53 ounces | 3.53 ounces | 2.4 ounces | 0.39 ounces | not specified | 3.17 ounces | 4.87 ounces | 2.72 ounces | 4.32 ounces | 6.56 ounces | 5.29 ounces | not specified | 1.45 ounces |
| Color | Multicolor | Black | Black | Black | various | Black | Red | Black | Black | Black | Black | Black | Multicolor | Red | Blue |
| Model | F4-3000C16D-16GTZR | CMK16GX4M2B3000C15 | CMK16GX4M2B3200C16 | FBA_4719692004970 | F4-3200C16S-16GVK | F4-3200C16Q-64GVK | F4-3200C16D-16GVRB | F4-3000C15D-16GVKB | 202715 | CMK16GX4M2D3000C16 | CMW16GX4M2C3200C16 | F4-3200C16D-32GTZR | F4-3600C18D-16GTZRX | F4-3000C16D-16GVRB | SP016GXLZU320BDA |
Pair these kits with the best DDR4 motherboards for optimal system stability and performance.
How to Choose DDR4 1.35V Memory
-
Check UDIMM Form Factor
Confirm your motherboard accepts standard 288-pin DDR4 UDIMM modules before purchasing. All desktop kits on this list use the unbuffered DIMM form factor designed specifically for full-sized desktop computer motherboards. Laptops and compact mini-PCs require smaller SODIMM modules, which are physically incompatible with these slots. Always check your system manual to verify your motherboard chipset supports full-size desktop DDR4 memory modules operating at 1.35V.
-
Choose Module Kit Configuration
Decide whether you want single-channel or multi-channel memory bandwidth. Installing two matched modules activates dual-channel mode, doubling data communication channels between your RAM and processor. A single 16GB module like the G.SKILL Ripjaws V F4-3200C16S-16GVK runs in single-channel mode, but it keeps open slots available for easy memory expansion later. Check how many memory slots your motherboard features before picking between single-stick, two-stick, or four-stick configurations.
-
Measure CPU Cooler Clearance
Measure the physical space under your CPU cooler before choosing tall memory heat spreaders. Large air coolers frequently hang over the nearest motherboard memory slots, blocking taller sticks. Modules with integrated lighting can stand up to 2 inches tall, as seen on the Corsair Vengeance RGB Pro. If your build uses an oversized dual-tower air cooler, verify your cooler clearance meets or exceeds the exact module height listed in product dimensions.
-
Verify Motherboard Frequency Support
Check the maximum memory speed supported by your motherboard chipset and processor. Operating DDR4 memory at 3200MHz or 3600MHz at 1.35V requires motherboard support for overclocking profiles such as Intel XMP. Entry-level motherboard chipsets often cap DDR4 memory frequencies below 3000MHz. Before selecting a higher-frequency kit such as the 3600MHz G.SKILL Trident Z RGB, inspect your motherboard memory qualified vendor list to confirm that your specific board handles that rated frequency stably.
-
Calculate Total Capacity Needs
Match your total gigabyte capacity to your actual computing workload. Standard desktop systems handling everyday multitasking and regular gaming perform smoothly with 16GB. Power users editing video or running virtual machines benefit from 32GB or 64GB setups, such as the four-module G.SKILL Ripjaws V 64GB kit. Evaluate how many background programs and heavy tools you run concurrently, then pick a capacity that avoids reaching full memory utilization during peak operation.
-
Check Heat Spreader Materials
Look at the heat dissipation hardware attached to the memory modules. Running DDR4 at 1.35V produces more heat than base 1.2V DDR4 profiles, making passive thermal management useful inside warm chassis environments. Kits like the Silicon Power Turbine include aluminum heat spreaders to draw heat away from the memory chips. Ensure your PC case maintains adequate internal airflow across your memory slots so heat spreaders can transfer thermal energy away from your modules effectively.
Frequently asked questions
Why do DDR4 memory kits operate at 1.35V instead of 1.2V?
Operating at 1.35V supplies additional electrical power required to sustain performance profiles beyond base specifications. Standard DDR4 operates at 1.2V, but modules pushing 3000MHz to 3600MHz rely on 1.35V to maintain signal stability. Your desktop motherboard applies this voltage profile automatically when you enable extreme memory profiles in firmware.
Can you mix 1.35V DDR4 RAM modules from different brands?
You should avoid combining disparate modules even if both run at 1.35V. Mixing brands or specifications like pairing G.SKILL Trident Z with Corsair Vengeance can cause timing mismatches. While both might share 1.35V ratings, differing CAS latencies such as CL15 and CL16 can force your system into unstable configurations.
What CAS latency ratings are standard for 1.35V DDR4 memory?
Listed 1.35V modules commonly feature CAS latencies ranging from CL15 to CL18. Kits rated at 3000MHz often deliver CL15 or CL16, such as Corsair Vengeance LPX. At 3200MHz, CL16 serves as the baseline, while faster options like the 3600MHz G.SKILL Trident Z kit scale to CL18 to preserve stability.
What cooler clearance is needed for tall 1.35V DDR4 RAM sticks?
Tall heat spreaders require verified clearance under large CPU air coolers. For example, Corsair Vengeance RGB Pro measures 2 inches high, while G.SKILL Trident Z RGB kits reach up to 1.73 inches. If your cooler overhangs the memory slots, consider low-profile options like Corsair Vengeance LPX kits instead.
Does a single 16GB 1.35V stick perform the same as a 2x8GB kit?
A single 16GB module runs in single-channel mode, offering less memory bandwidth than a dual-channel kit. A 2x8GB configuration transfers data across two separate channels simultaneously. Choosing a single stick like the G.SKILL Ripjaws V 16GB module keeps extra motherboard slots open for future capacity expansions.
What total capacity configurations are available among 1.35V DDR4 kits?
These kits feature total capacities ranging from 16GB up to 64GB. Common configurations include two 8GB sticks for 16GB or two 16GB sticks for 32GB. For maximum capacity on four-slot motherboards, kits like the G.SKILL Ripjaws V 64GB pack provide four matched modules operating at 1.35V.