15 Best Nemix RAM ddr5 RAMs with CL22, Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
When you shop for Nemix RAM ddr5 RAM with CL22 configurations, matching form factor and channel requirements to your motherboard is essential. This guide compares 15 products based strictly on the specifications published on their listings. The NEMIX RAM 64GB DDR4 3200MHz ECC RDIMM takes the top spot because its 64GB registered capacity and 1.2V operating voltage deliver stable single-module memory for enterprise server boards.
This breakdown helps you decide which module capacity, ECC support level, and DIMM form factor fit your specific hardware setup.
Quick picks
The best fit for you
- You need a single-stick 64GB registered server memory upgrade NEMIX RAM 64GB DDR4 3200MHz ECC RDIMM This 64GB DDR4-3200 ECC RDIMM module provides registered error correction and runs at 1.2V.
- You need massive non-ECC desktop capacity across eight slots Nemix RAM 256GB DDR4-3200 CL22 UDIMM Kit The kit supplies 256GB using eight 32GB unbuffered non-ECC modules running at 3200MHz.
- You need a single unbuffered ECC module for workstations Nemix RAM 32GB DDR4 3200MHz ECC UDIMM This single 32GB UDIMM delivers DDR4-3200 speed with ECC error correction at standard 1.2V.
- You need high-density load-reduced memory for enterprise servers Nemix RAM 128GB DDR4 3200MHz ECC LRDIMM Its 128GB load-reduced LRDIMM design provides ECC protection and operates at 3200MHz and 1.2V.
Our 15 picks
NEMIX RAM 64GB DDR4 3200MHz ECC RDIMM
Best for: single-module enterprise server memory upgrades
- CAS Latency
- CL22 (what this guide is about)
- Capacity
- 64GB
- Memory Speed
- 3200MHz
- Kit Configuration
- 1X64GB
- Form Factor
- 288-PIN
- Voltage
- 1.2V
This Nemix RAM module provides 64GB of memory on a single 288-pin stick. It runs at DDR4-3200 speeds with a CL22 CAS latency and operates at 1.2V. Because this is a registered ECC RDIMM with a 2Rx4 rank, it detects single-bit data errors in compatible enterprise systems. It suits you if you maintain or upgrade servers like PowerEdge, ProLiant, or ThinkSystem platforms requiring registered memory.
Pros
- 64GB capacity on a single 288-pin module
- Operates at 3200MHz with CL22 latency at 1.2V
- Registered ECC architecture corrects single-bit memory errors
- Includes lifetime replacement warranty and technical support
Cons
- Only compatible with server hardware supporting registered RDIMMs
- Single module does not supply multi-channel operation on its own
Good fit if
- You run enterprise systems such as Xeon Scalable, PowerEdge, or ProLiant servers
- You need 64GB of DDR4-3200 CL22 memory on one stick
- You require 1.2V 2Rx4 registered ECC memory modules
Skip if
- You need standard unbuffered RAM for a desktop PC
- You require a matched multi-module memory kit
Verdict: Nemix RAM 64GB DDR4-3200 CL22 ECC RDIMM delivers high-density server memory with registered error correction and standard 1.2V operation. It serves as a straightforward single-stick capacity upgrade for compatible enterprise motherboards.
NEMIX 64GB (4x16GB) DDR4 3200MHz ECC RDIMM
Best for: quad-channel DDR4 server memory upgrades
- CAS Latency
- CL22 (what this guide is about)
- Capacity
- 64GB
- Memory Speed
- 3200MHz
- Kit Configuration
- 4X16GB
- Form Factor
- 288-pin RDIMM
- Voltage
- 1.2V
This Nemix RAM kit provides 64GB of total capacity divided across four 16GB registered DIMMs. It operates at 3200MHz with CL22 timing and requires a standard 1.2V supply. Built with a 2Rx8 dual-rank layout and registered ECC architecture, it targets enterprise servers running platforms like Xeon Scalable or PowerEdge. You get verified error-checking capabilities designed for multi-channel server boards that require four populated RDIMM slots.
Pros
- Includes four matched 16GB 2Rx8 modules for multi-channel configurations
- Registered ECC architecture corrects single-bit memory errors
- Standard 1.2V operating voltage at 3200MHz CL22
- Backed by a lifetime replacement warranty
Cons
- RDIMM form factor is incompatible with standard desktop motherboards
- Requires four open 288-pin slots on your server board
Good fit if
- You need a 64GB four-module ECC registered kit for an enterprise server.
- You run hardware specified for DDR4-3200 CL22 1.2V memory.
Skip if
- You need unbuffered DIMMs or standard desktop DDR4 memory.
- You have fewer than four available memory slots.
Verdict: Nemix RAM 64GB (4x16GB) DDR4 3200MHz ECC RDIMM delivers multi-module stability and registered error correction for compatible server platforms. It serves systems requiring a four-channel DDR4-3200 configuration.
Nemix RAM 32GB DDR4 3200MHz ECC UDIMM
Best for: single-module workstation ECC memory setups
- CAS Latency
- CL22 (what this guide is about)
- Capacity
- 32GB
- Memory Speed
- 3200MHz
- Kit Configuration
- 1X32GB
- Form Factor
- 288-pin UDIMM
- Voltage
- 1.2V
This Nemix RAM module gives you 32GB of DDR4 memory running at 3200MHz with a CL22 CAS latency. It uses a 288-pin unbuffered UDIMM form factor at 1.2V with a 2Rx8 dual-rank design. Built-in ECC support actively detects and corrects single-bit memory errors. It suits workstation and server builds using platforms like TRX40 or Xeon W-1300 where you require error-checking stability.
Pros
- On-module ECC detects and corrects single-bit errors
- Operates at 3200MHz with CL22 latency at 1.2V
- Dual-rank 2Rx8 architecture on a single 32GB module
- Includes manufacturer lifetime replacement warranty
Cons
- Single-stick package does not provide multi-channel memory performance
- Unbuffered ECC format requires specific motherboard support and will not work in RDIMM-only slots
Good fit if
- You run an ECC-capable workstation platform such as AMD TRX40, WRX80, or Intel Xeon W-1300.
- You need on-module ECC protection against single-bit data corruption in an unbuffered setup.
- You want a single 32GB stick to keep additional memory slots open for later expansion.
Skip if
- You require registered memory (RDIMMs) for your server platform.
- You want an immediate multi-channel kit with multiple modules included in the box.
Verdict: Nemix RAM 32GB 3200MHz ECC UDIMM provides enterprise error correction and standard 1.2V 3200MHz speed in a single stick. It is a dependable choice for compatible Xeon or Threadripper workstations that require unbuffered ECC support.
Nemix RAM 128GB DDR4 3200MHz ECC LRDIMM
Best for: High-density server virtualization and database platforms
- CAS Latency
- CL22 (what this guide is about)
- Capacity
- 128GB
- Memory Speed
- 3200MHz
- Kit Configuration
- 1X128GB
- Form Factor
- 288-PIN LRDIMM
- Voltage
- 1.2V
This Nemix RAM module provides 128GB of DDR4 memory running at 3200MHz with a CAS latency of CL22. Operating at 1.2V, this single 288-pin module uses an 8Rx4 load-reduced design (LRDIMM) with ECC support to minimize electrical load across high-density memory channels. It suits you if you maintain compatible server or workstation motherboards that require high-capacity, multi-socket memory configurations for virtualization or memory-intensive background workloads.
Pros
- High 128GB capacity on a single 288-pin module
- Load-reduced (LRDIMM) buffering lowers bus electrical load
- Runs at 3200MHz (PC4-25600) with standard 1.2V operation
- Includes ECC support for enterprise data integrity
Cons
- Incompatible with desktop UDIMM or standard RDIMM slots
- Requires motherboard and BIOS support specifically for 128GB LRDIMMs
Good fit if
- You run a server board that explicitly supports 128GB DDR4 LRDIMMs.
- You need high-density ECC memory running at 3200MHz and CL22.
Skip if
- You need unbuffered (UDIMM) or registered (RDIMM) memory for your system.
- You operate a standard consumer desktop PC rather than a server platform.
Verdict: Nemix RAM 128GB DDR4 3200MHz ECC LRDIMM delivers high memory density with ECC protection for compatible enterprise server boards. Its 8Rx4 load-reduced design ensures proper electrical handling across multi-DIMM channels.
Nemix RAM 32GB 3200MHz ECC UDIMM Kit
Best for: workstations needing unbuffered ECC DDR4 memory
- CAS Latency
- CL22 (what this guide is about)
- Capacity
- 32GB
- Memory Speed
- 3200MHz
- Kit Configuration
- 2X16GB
- Form Factor
- 288-PIN UDIMM
- Voltage
- 1.2V
This Nemix RAM kit gives you 32GB of memory split across two 16GB unbuffered ECC modules. It operates at 3200MHz with a CL22 latency rating and requires a standard 1.2V. Designed with a 2Rx8 dual-rank configuration on a 288-pin layout, it suits workstations and entry-level server setups that demand error-correcting memory support, such as platforms using compatible Intel Xeon or AMD processors.
Pros
- On-module ECC catches and corrects single-bit memory errors
- Standard 1.2V operating voltage at DDR4-3200 speed
- Dual-rank 2Rx8 architecture across two 16GB sticks
- Includes a lifetime replacement warranty
Cons
- Requires a motherboard and processor that specifically support ECC UDIMMs
- CL22 timing rather than lower-latency alternatives
Good fit if
- You need 32GB of dual-channel DDR4 memory with ECC capability.
- You use compatible hardware like Xeon W, EPYC Milan, TRX40, or WRX80 boards.
- You want 3200MHz speed at standard 1.2V operation.
Skip if
- You need registered RDIMMs rather than unbuffered memory.
- You use a consumer desktop motherboard without ECC support.
Verdict: Nemix RAM 32GB (2x16GB) DDR4 3200MHz ECC UDIMM supplies error-correcting memory for compatible workstation and server platforms. Its standard 1.2V dual-rank layout delivers DDR4-3200 speeds with built-in data integrity protection.
Nemix RAM 32GB 3200MHz DDR4 ECC RDIMM Kit
Best for: dual-channel registered DDR4 server upgrades
- CAS Latency
- CL22 (what this guide is about)
- Capacity
- 32GB
- Memory Speed
- 3200MHz
- Kit Configuration
- 2x16GB
- Form Factor
- 288-pin RDIMM
- Voltage
- 1.2V
This Nemix RAM dual-module memory kit provides 32GB total capacity using two 16GB 288-pin DDR4 modules. Operating at 3200MHz with CL22 CAS latency and 1.2V, it features a 2Rx8 registered dual-rank architecture with error-correcting code. You get hardware-level protection against single-bit memory errors. It suits enterprise users deploying compatible dual-channel server platforms like PowerEdge, ProLiant, or Xeon Scalable systems needing validated registered memory.
Pros
- Registered ECC design detects and corrects single-bit errors
- Runs at 3200MHz standard speed with 1.2V power draw
- Two-module 32GB package supports dual-channel memory bandwidth
- Includes manufacturer lifetime replacement warranty
Cons
- Requires server boards supporting registered RDIMM modules
- Incompatible with standard desktop unbuffered DIMM slots
Good fit if
- You run enterprise servers such as PowerEdge, ProLiant, or Xeon Scalable systems.
- You need a 32GB dual-module 2Rx8 registered ECC memory configuration.
Skip if
- You use consumer desktop motherboards requiring unbuffered non-ECC RAM.
- You need a single 32GB module to leave more motherboard slots open.
Verdict: Nemix RAM 32GB 3200MHz CL22 ECC RDIMM Kit delivers reliable dual-channel DDR4 memory performance with registered error correction for enterprise server platforms. It is a dependable choice when you need exact-match 2Rx8 server memory.
Nemix RAM 32GB DDR4 3200MHz ECC UDIMM Kit
Best for: workstations and entry servers needing ECC memory
- CAS Latency
- CL22 (what this guide is about)
- Capacity
- 32GB
- Memory Speed
- 3200MHz
- Kit Configuration
- 2X16GB
- Form Factor
- 288-PIN UDIMM
- Voltage
- 1.2V
This Nemix RAM kit gives you 32GB of memory split across two 16GB DDR4 modules running at 3200MHz. Operating at 1.2V with CL22 timing, it features unbuffered ECC error correction to stop data corruption on compatible systems. It suits you if you maintain compatible Xeon, EPYC, or workstation platforms requiring reliable 2Rx8 dual-rank memory.
Pros
- 3200MHz speed at 1.2V standard voltage
- ECC unbuffered design corrects single-bit errors
- Dual-rank 2Rx8 layout across two 16GB modules
- Lifetime replacement warranty with US technical support
Cons
- Uses DDR4 standard rather than DDR5
- Requires specific motherboard support for unbuffered ECC memory
Good fit if
- You need 32GB of unbuffered ECC memory for an entry server or workstation.
- You use platforms such as Xeon W, AMD EPYC Milan, TRX40, or WRX80.
Skip if
- You need DDR5 memory modules for your system.
- You run a standard desktop motherboard that lacks ECC UDIMM support.
Verdict: Nemix RAM 32GB DDR4-3200 ECC UDIMM Kit delivers stable dual-channel operation with single-bit error protection for compatible server and workstation motherboards.
Nemix RAM 256GB DDR4-3200 CL22 UDIMM Kit
Best for: eight-slot desktop motherboards needing massive DDR4 capacity
- CAS Latency
- CL22 (what this guide is about)
- Capacity
- 256GB
- Memory Speed
- 3200MHz
- Kit Configuration
- 8X32GB
- Form Factor
- 288-PIN UDIMM
- Voltage
- 1.2V
This memory kit supplies 256GB of DDR4 memory across eight 32GB 288-pin UDIMMs. It operates at 3200MHz with CL22 timings on a standard 1.2V profile. Designed for desktop systems that support eight unbuffered memory slots, this high-capacity configuration suits you if you run heavy multitasking setups or memory-intensive creative workloads without requiring ECC support.
Pros
- 256GB total capacity across eight 32GB modules
- Standard DDR4-3200 speed with CL22 latency at 1.2V
- Includes lifetime replacement warranty and US-based tech support
- Dual-rank 2Rx8 unbuffered design
Cons
- Requires a desktop motherboard with eight open UDIMM slots
- Non-ECC unbuffered memory lacks error-checking features
- Not compatible with laptop SODIMM slots
Good fit if
- You have a desktop system with eight DDR4 slots supporting 256GB.
- You need high-density multitasking memory running at standard 1.2V.
- You want non-ECC unbuffered memory backed by a lifetime replacement warranty.
Skip if
- You only have four or fewer memory slots on your motherboard.
- You require ECC support for server or specialized workstation tasks.
- You need compact SODIMM modules for a laptop.
Verdict: Nemix RAM 256GB (8x32GB) DDR4 3200MHz UDIMM Kit delivers maximum DDR4 capacity across eight matched modules for workstations and high-demand desktop PCs. Its standard 1.2V operation and CL22 timings ensure compatibility on motherboards that accommodate eight unbuffered DIMMs.
Nemix RAM 64GB (2x32GB) 3200MHz ECC UDIMM
Best for: Workstations needing 64GB ECC unbuffered DDR4 memory
- CAS Latency
- CL22 (what this guide is about)
- Capacity
- 64GB
- Memory Speed
- 3200MHz
- Kit Configuration
- 2X32GB
- Form Factor
- 288-pin UDIMM
- Voltage
- 1.2V
This Nemix RAM kit provides 64GB of total system memory split across two 32GB DDR4 modules. It operates at 3200MHz with a CL22 CAS latency and a standard 1.2V profile. Designed as 288-pin unbuffered ECC UDIMMs with a 2Rx8 rank configuration, it targets compatible server and workstation motherboards. You get hardware-level single-bit error correction to help safeguard continuous workloads against memory-level data corruption.
Pros
- 64GB capacity across two 32GB 2Rx8 dual-rank modules
- ECC unbuffered design detects and corrects single-bit errors
- Standard DDR4 3200MHz speed at 1.2V with CL22 timing
- Backed by a lifetime replacement warranty
Cons
- Unbuffered form factor unsupported on registered RDIMM server boards
- CL22 latency slower than tighter-timed performance kits
Good fit if
- You run a workstation or server board requiring DDR4 ECC UDIMMs.
- You need a dual-channel 64GB memory setup running at 3200MHz.
Skip if
- You need registered RDIMM or LRDIMM enterprise server memory.
- You have a motherboard that requires standard non-ECC RAM.
Verdict: Nemix RAM 64GB (2x32GB) DDR4 3200MHz ECC UDIMM gives workstation users dual-channel error-correcting memory at standard 1.2V operation. It is a solid choice for compatible platforms that require unbuffered ECC support.
Nemix RAM 32GB (4x8GB) DDR4 3200MHz ECC UDIMM
Best for: four-slot unbuffered ECC workstation setups
- CAS Latency
- CL22 (what this guide is about)
- Capacity
- 32GB
- Memory Speed
- 3200MHz
- Kit Configuration
- 4X8GB
- Form Factor
- 288-pin UDIMM
- Voltage
- 1.2V
View on Amazon: Nemix RAM 32GB (4x8GB) DDR4 3200MHz ECC UDIMM
This kit provides 32GB of memory divided into four 8GB modules. Operating at DDR4 3200MHz with CL22 latency at 1.2V, it features single-rank 1Rx8 construction. Built with unbuffered ECC error checking, it corrects single-bit memory faults on compatible hardware. You will find it suits workstations and entry servers using platforms like Xeon W or AMD EPYC that require unbuffered 288-pin ECC UDIMMs.
Pros
- On-module ECC for real-time single-bit error correction
- Standard 1.2V DDR4 3200MHz operation at CL22 latency
- Four-module configuration balances quad-slot server boards
- Compatible with Xeon W-1300, Xeon W-3300, EPYC Milan, TRX40, and WRX80
Cons
- Occupies four memory slots to reach 32GB total capacity
- Requires a CPU and motherboard that specifically support ECC UDIMMs
Good fit if
- You need unbuffered ECC stability for an entry server or workstation.
- You have four available DIMM slots and target a 32GB memory total.
- You run a compatible platform such as Xeon W, AMD EPYC, TRX40, or WRX80.
Skip if
- You have only two open memory slots on your motherboard.
- You run standard consumer desktop hardware without ECC UDIMM support.
Verdict: Nemix RAM 32GB (4x8GB) DDR4 3200MHz ECC UDIMM delivers multi-slot unbuffered ECC error protection for entry servers and professional workstations. It matches systems needing standard 1.2V DDR4-3200 specifications across four physical memory channels.
Nemix RAM 192GB (6x32GB) DDR4 3200MHz ECC RDIMM
Best for: six-channel DDR4 enterprise server memory upgrades
- CAS Latency
- CL22 (what this guide is about)
- Capacity
- 192GB
- Memory Speed
- 3200MHZ
- Kit Configuration
- 6X32GB
- Form Factor
- 288-pin RDIMM
- Voltage
- 1.2V
View on Amazon: Nemix RAM 192GB (6x32GB) DDR4 3200MHz ECC RDIMM
This Nemix RAM kit provides 192GB of DDR4 memory across six 32GB 288-pin RDIMMs. Running at 3200MHz with CL22 timing at 1.2V, the registered modules offload the memory controller and utilize ECC to correct single-bit errors. This 2Rx4 configuration suits multi-channel enterprise servers like Xeon Scalable, ProLiant, and ThinkSystem platforms when you need dependable system stability and large memory capacity.
Pros
- 192GB total capacity across six 32GB modules
- Registered ECC architecture catches and corrects single-bit errors
- Dual rank 2Rx4 design running at 3200MHz and 1.2V
- Lifetime replacement warranty with US-based technical support
Cons
- RDIMM form factor is incompatible with standard desktop motherboards
- DDR4 architecture rather than newer DDR5 technology
- Requires six open memory slots to install the full kit
Good fit if
- You run a compatible Xeon Scalable, ProLiant, ThinkSystem, or Supermicro server.
- You need 192GB of registered ECC DDR4 memory across six slots.
- You want CL22 3200MHz modules operating at standard 1.2V.
Skip if
- You need unbuffered RAM for a consumer desktop system.
- You have fewer than six free DIMM slots available.
- You require DDR5 memory instead of DDR4.
Verdict: Nemix RAM 192GB (6x32GB) DDR4 3200MHz ECC RDIMM delivers high-capacity registered server memory with error correction for multi-channel platforms. It provides reliable CL22 timings and standard 1.2V operation for enterprise deployments.
Nemix RAM 64GB DDR4 3200MHz ECC RDIMM
Best for: enterprise server memory expansion and replacement
- CAS Latency
- CL22 (what this guide is about)
- Capacity
- 64GB
- Memory Speed
- 3200MHz
- Kit Configuration
- 1x64GB
- Form Factor
- 288-pin RDIMM
- Voltage
- 1.2V
This Nemix RAM module provides 64GB of DDR4 memory running at 3200MHz with a CL22 latency. Built as a 288-pin registered ECC RDIMM operating at 1.2V with a 2Rx4 dual-rank configuration, it targets server platforms requiring error-correcting memory. You get single-bit error protection and buffered signal stability, making it suitable if you need enterprise-grade capacity expansion for compatible server motherboards that support 64GB DDR4 RDIMMs.
Pros
- 64GB single-module capacity running at 3200MHz with CL22 timings
- Registered ECC architecture corrects single-bit memory errors
- Standard 1.2V operating voltage maintains low power consumption
- Includes lifetime replacement warranty and technical support
Cons
- Server-only RDIMM form factor incompatible with standard desktop PCs
- Single-module package does not provide multi-channel bandwidth on its own
Good fit if
- You need a 64GB DDR4 3200MHz CL22 registered ECC module for a compatible server.
- You require hardware error correction and buffered memory stability.
Skip if
- You use a consumer desktop motherboard requiring unbuffered non-ECC RAM.
- You need a multi-module kit to populate multiple memory channels at once.
Verdict: Nemix RAM 64GB DDR4 3200MHz ECC RDIMM delivers high-capacity server memory with registered stability and error correction for compatible platforms. It provides a direct replacement option for systems requiring 2Rx4 1.2V CL22 specifications.
Nemix RAM 256GB (8x32GB) 3200MHz DDR4 RDIMM Kit
Best for: eight-slot enterprise server memory expansions
- CAS Latency
- CL22 (what this guide is about)
- Capacity
- 256GB
- Memory Speed
- 3200MHZ
- Kit Configuration
- 8X32GB
- Form Factor
- 288-pin RDIMM
- Voltage
- 1.2V
View on Amazon: Nemix RAM 256GB (8x32GB) 3200MHz DDR4 RDIMM Kit
This Nemix RAM memory kit provides 256GB of total capacity using eight 32GB DDR4 modules. You get 3200MHz clock speeds, CL22 latency, and 1.2V operating voltage. The registered 288-pin ECC RDIMM build offloads memory controllers and corrects data errors. It suits enterprise servers like Xeon Scalable, ProLiant, or PowerEdge systems requiring high-density multi-channel configurations across eight open DIMM slots.
Pros
- 256GB total capacity split into eight 32GB modules
- Registered ECC architecture corrects single-bit memory errors
- Runs at 3200MHz with CL22 timing at 1.2V
- Includes lifetime replacement warranty with US technical support
Cons
- Requires eight available 288-pin DIMM slots
- RDIMM design limits compatibility strictly to supported servers
Good fit if
- You need 256GB of registered ECC DDR4 memory across eight slots.
- You run compatible enterprise servers like PowerEdge, ProLiant, or Xeon Scalable platforms.
Skip if
- You use standard desktop motherboards requiring unbuffered non-ECC memory.
- You have fewer than eight open DIMM slots available.
Verdict: Nemix RAM 256GB DDR4 3200MHz ECC RDIMM Kit supplies 256GB of high-density registered server memory with CL22 timing and ECC error handling. It is built strictly for enterprise servers with eight available memory slots.
Nemix RAM 32GB DDR4 3200MHz ECC RDIMM
Best for: Xeon Scalable enterprise server memory expansion
- CAS Latency
- CL22 (what this guide is about)
- Capacity
- 32GB
- Memory Speed
- 3200MHz
- Kit Configuration
- 1X32GB
- Form Factor
- 288-PIN RDIMM
- Voltage
- 1.2V
This module is a single 32GB DDR4 server memory stick from Nemix RAM. It operates at 3200MHz with CL22 timing and a 1.2V operational voltage. The module uses a 288-pin Registered RDIMM design with ECC support and a 2Rx4 rank build. You will find it suits enterprise servers requiring registered memory, such as PowerEdge, ProLiant, ThinkSystem, or Supermicro platforms built for Xeon Scalable processors.
Pros
- Operates at 3200MHz speed with CL22 latency
- ECC Registered architecture catches and corrects single-bit errors
- Low 1.2V power consumption on a 288-pin interface
- Dual-rank 2Rx4 configuration matching OEM memory rules
Cons
- Requires a server motherboard supporting 288-pin registered RDIMMs
- Ships as an individual 32GB stick rather than a multi-channel set
Good fit if
- You need a single 32GB 2Rx4 DDR4-3200 replacement RDIMM for a compatible server.
- You run Xeon Scalable hardware across PowerEdge, ProLiant, ThinkSystem, or Supermicro platforms.
Skip if
- You have a standard consumer desktop that requires unbuffered DIMMs.
- You need a multi-module memory kit to populate multiple channels at once.
Verdict: Nemix RAM 32GB DDR4 3200MHz CL22 ECC RDIMM provides an enterprise-grade 1.2V memory upgrade for compatible server hardware. Its 2Rx4 registered design delivers error correction for Xeon Scalable systems.
Nemix RAM 128GB DDR4 3200MHz ECC LRDIMM
Best for: high-density server virtualization and multi-socket platforms
- CAS Latency
- CL22 (what this guide is about)
- Capacity
- 128GB
- Memory Speed
- 3200MHz
- Kit Configuration
- 1X128GB
- Form Factor
- 288-PIN LRDIMM
- Voltage
- 1.2V
This Nemix RAM module gives you 128GB of DDR4 memory on a single 288-pin stick. Operating at 3200MHz with CL22 latency and 1.2V, it uses a 4Rx4 load-reduced (LRDIMM) design to decrease electrical load on server memory buses. It suits you if you manage dense virtualization platforms or multi-socket servers requiring high per-channel capacity alongside built-in ECC error protection.
Pros
- High single-module capacity of 128GB
- 4Rx4 load-reduced design buffers bus electrical load
- Standard 1.2V operating voltage at 3200MHz CL22
- ECC support for data integrity in server environments
Cons
- Requires LRDIMM-compatible server hardware rather than standard desktop or RDIMM slots
- Single-stick package provides no multi-channel bandwidth on its own
Good fit if
- You run a server board that specifically supports 288-pin DDR4 LRDIMM modules.
- You need to maximize per-channel memory density with 128GB on one slot.
- You require ECC functionality for 24/7 server workloads.
Skip if
- You use a standard desktop motherboard requiring unbuffered UDIMMs.
- You need registered RDIMMs rather than load-reduced memory.
Verdict: Nemix RAM 128GB DDR4 3200MHz LRDIMM delivers high-density server memory with load-reduced buffering and ECC support. It provides an exact-fit option for enterprise systems configured for 1.2V CL22 LRDIMM modules.
Specifications side by side
| Spec | NEMIX RAM 64GB DDR4 3200MHz ECC RDIMM | NEMIX 64GB (4x16GB) DDR4 3200MHz ECC RDIMM | Nemix RAM 32GB DDR4 3200MHz ECC UDIMM | Nemix RAM 128GB DDR4 3200MHz ECC LRDIMM | Nemix RAM 32GB 3200MHz ECC UDIMM Kit | Nemix RAM 32GB 3200MHz DDR4 ECC RDIMM Kit | Nemix RAM 32GB DDR4 3200MHz ECC UDIMM Kit | Nemix RAM 256GB DDR4-3200 CL22 UDIMM Kit | Nemix RAM 64GB (2x32GB) 3200MHz ECC UDIMM | Nemix RAM 32GB (4x8GB) DDR4 3200MHz ECC UDIMM | Nemix RAM 192GB (6x32GB) DDR4 3200MHz ECC RDIMM | Nemix RAM 64GB DDR4 3200MHz ECC RDIMM | Nemix RAM 256GB (8x32GB) 3200MHz DDR4 RDIMM Kit | Nemix RAM 32GB DDR4 3200MHz ECC RDIMM | Nemix RAM 128GB DDR4 3200MHz ECC LRDIMM |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity | 64GB | 64GB | 32GB | 128GB | 32GB | 32GB | 32GB | 256GB | 64GB | 32GB | 192GB | 64GB | 256GB | 32GB | 128GB |
| Memory Speed | 3200MHz | 3200MHz | 3200MHz | 3200MHz | 3200MHz | 3200MHz | 3200MHz | 3200MHz | 3200MHz | 3200MHz | 3200MHZ | 3200MHz | 3200MHZ | 3200MHz | 3200MHz |
| CAS Latency | CL22 | CL22 | CL22 | CL22 | CL22 | CL22 | CL22 | CL22 | CL22 | CL22 | CL22 | CL22 | CL22 | CL22 | CL22 |
| Kit Configuration | 1X64GB | 4X16GB | 1X32GB | 1X128GB | 2X16GB | 2x16GB | 2X16GB | 8X32GB | 2X32GB | 4X8GB | 6X32GB | 1x64GB | 8X32GB | 1X32GB | 1X128GB |
| Form Factor | 288-PIN | 288-pin RDIMM | 288-pin UDIMM | 288-PIN LRDIMM | 288-PIN UDIMM | 288-pin RDIMM | 288-PIN UDIMM | 288-PIN UDIMM | 288-pin UDIMM | 288-pin UDIMM | 288-pin RDIMM | 288-pin RDIMM | 288-pin RDIMM | 288-PIN RDIMM | 288-PIN LRDIMM |
| Voltage | 1.2V | 1.2V | 1.2V | 1.2V | 1.2V | 1.2V | 1.2V | 1.2V | 1.2V | 1.2V | 1.2V | 1.2V | 1.2V | 1.2V | 1.2V |
| ECC Support | ECC RDIMM | Registered ECC | ECC | ECC | ECC Unbuffered | Registered ECC | ECC Unbuffered | Non-ECC Unbuffered | ECC | ECC | Registered ECC | Registered ECC | ECC | ECC Registered | ECC |
| Compatible Device | Server | Server | not specified | Server | not specified | Server | Server | Desktop, PC | Server | Server | Server | Server | Server | Server | Server |
| Dimensions | 8 × 3 × 1 inches | 8 × 3 × 1 inches | 8 × 3 × 1 inches | 8 × 3 × 1 inches | 5 × 3 × 1 inches | 5 × 3 × 1 inches | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Size | 64GB (1X64GB) DDR4 3200MHZ RDIMM | 64GB (4X16GB) DDR4 3200MHZ RDIMM | 32GB (1X32GB) DDR4 3200MHZ ECC UDIMM | 128GB (1X128GB) DDR4 3200MHZ LRDIMM | 32GB (2X16GB) DDR4 3200MHZ ECC UDIMM | 32GB (2X16GB) DDR4 3200MHZ RDIMM | 32GB (2X16GB) DDR4 3200MHZ ECC UDIMM | 256GB (8X32GB) DDR4 3200MHZ UDIMM | 64GB (2X32GB) DDR4 3200MHZ ECC UDIMM | 32GB (4X8GB) DDR4 3200MHZ ECC UDIMM | 192GB (6X32GB) DDR4 3200MHZ RDIMM | 64GB (1X64GB) DDR4 3200MHZ RDIMM | 256GB (8X32GB) DDR4 3200MHZ RDIMM | 32GB (1X32GB) DDR4 3200MHZ RDIMM | 128GB (1X128GB) DDR4 3200MHZ ECC LRDIMM |
| Color | Gold | Gold | Gold | 128GB Ram (1x128GB) LRDIMM | Gold | not specified | not specified | not specified | Gold | Gold | not specified | not specified | Black | Black | Black |
| Model | MR25600-924K01-G | MR25600-628K04-G | ME25600-328K01-G | ML25600-784K01-G | ME25600-628K02-G | ROMED8-2T | not specified | MD25600-328K08-G | not specified | not specified | not specified | HMAA8GR7CJR4N-XN | not specified | not specified | not specified |
If your memory modules lack heat spreaders, you can compare the best heatsinks for RAM to manage operating temperatures.
Choosing the Right Nemix Memory Kit
-
Match Physical Channel Architecture
Motherboard platforms route traces to support single, dual, quad, or six-channel memory architectures. Buying a multi-module package ensures you populate slots symmetrically for peak memory bandwidth. For example, the Nemix RAM 192GB (6x32GB) DDR4 3200MHz ECC RDIMM kit supplies six matched sticks designed specifically for platforms with six active channels per socket. If your system runs quad-channel memory instead, install a four-module kit. Check your processor specifications to see how many channels the integrated memory controller supports before choosing.
-
Evaluate Individual Module Density
Motherboards impose strict caps on both maximum total system memory and individual slot density. When you plan massive memory capacity, examine the maximum gigabytes supported per individual slot. The Nemix RAM 128GB DDR4 3200MHz ECC LRDIMM delivers high capacity on a single stick, which helps systems achieve large memory pools without filling every slot immediately. If your motherboard caps slot density at 32GB or 64GB, a 128GB stick will fail to boot. Always confirm the per-socket DIMM capacity limits detailed in your motherboard manual.
-
Verify 1.2V Power Delivery
Operating voltage influences power draw and thermal generation inside dense chassis enclosures. These memory modules run at 1.2V, which matches standard JEDEC DDR4 electrical baselines. The Nemix RAM 32GB DDR4 3200MHz ECC UDIMM functions at this standard voltage without requiring custom motherboard power profiles or BIOS voltage adjustments. This baseline voltage ensures broad compatibility across corporate workstations and standard enterprise servers. You should confirm that your system supplies standard 1.2V power to the DIMM sockets without requiring overclocking profiles.
-
Understand CL22 Timing Performance
CAS latency indicates the delay in clock cycles before data transfers begin once requested. A rating of CL22 at 3200MHz represents the standard JEDEC timing specification for enterprise DDR4 hardware. The NEMIX RAM 64GB DDR4 3200MHz ECC RDIMM pairs this CL22 latency with native 3200MHz frequency out of the box. This configuration prioritizes stable signal integrity over aggressive timing tweaks. When you select memory, verify that your CPU memory controller natively handles 3200MHz speeds at CL22 to avoid automatic downclocking.
-
Consider Module Rank Configuration
Memory rank refers to the internal layout of DRAM chips accessible on a module. Motherboards allow only a fixed number of electrical ranks per memory channel. For instance, the Nemix RAM 32GB DDR4 3200MHz ECC RDIMM utilizes a 2Rx4 registered design that distributes electrical load efficiently. Exceeding the maximum supported rank total on a memory channel forces the motherboard to downclock the bus or refuse to boot entirely. Review your motherboard memory population matrix to ensure that adding dual-rank modules will not surpass rank limits.
-
Count Motherboard DIMM Slots
Before buying multi-stick bundles, count your available DIMM slots and verify your expansion plans. Kits that bundle eight modules, such as the Nemix RAM 256GB DDR4-3200 CL22 UDIMM Kit, require eight individual physical slots on the motherboard. If your board provides only four slots, installing an eight-stick kit is physically impossible. Furthermore, filling every available slot leaves no room for future expansion without replacing existing sticks. Determine how many open slots your board has and plan accordingly.
Frequently asked questions
What does CAS Latency CL22 mean for Nemix 3200MHz memory modules?
CAS Latency 22 indicates the module takes 22 clock cycles to deliver data after receiving a read command. At a memory speed of 3200MHz, CL22 is the standard JEDEC timing specification operating at 1.2V across these Nemix modules. It provides baseline timing compatibility for enterprise servers, workstations, and desktop motherboards without requiring manual overclocking profiles or elevated voltage settings.
What is the operating voltage across these Nemix RAM 3200MHz modules?
All 15 listed Nemix RAM 3200MHz options operate at a standard 1.2V baseline voltage. Running at 1.2V ensures full JEDEC compliance across RDIMM, LRDIMM, and UDIMM form factors. This standard power level minimizes thermal output within multi-channel workstations and dense server chassis while maintaining stable signal timing across single-module or multi-stick memory configurations up to 256GB.
Can you mix Nemix ECC RDIMMs with Nemix ECC UDIMMs on the same motherboard?
No, you cannot mix registered RDIMMs and unbuffered UDIMMs together on the same system board. Motherboards are engineered to handle either registered or unbuffered signal lines, never both simultaneously. For instance, Nemix RDIMM kits like the 64GB 4x16GB kit require dedicated server memory controllers, whereas unbuffered options like the 32GB 1x32GB ECC UDIMM fit workstation sockets requiring unbuffered architecture.
Which listed Nemix memory kit is suitable for standard non-ECC desktop PCs?
The Nemix RAM 256GB DDR4-3200 CL22 UDIMM Kit (model MD25600-328K08-G) is the only option specified for non-ECC desktop PCs. It consists of eight 32GB unbuffered non-ECC modules running at standard 1.2V. All other listed kits feature ECC error correction designed for workstations and enterprise server platforms, which may not post on consumer desktop motherboards lacking ECC support.
When should you choose a Nemix LRDIMM instead of a standard RDIMM?
You should select a Nemix LRDIMM when configuring high-density multi-socket server platforms or memory-heavy virtualization setups. Products such as the Nemix RAM 128GB DDR4 3200MHz ECC LRDIMM utilize an 8Rx4 load-reduced design. This design buffers both data lines and address lines, reducing electrical loading on the memory bus when deploying maximum capacity across all motherboard memory channels.
What module rank specifications are featured on Nemix 3200MHz server RDIMMs?
Listed Nemix RDIMMs include dual-rank 2Rx4 and 2Rx8 module configurations depending on the specific capacity and kit. For example, the Nemix RAM 32GB ECC RDIMM and 64GB RDIMM (HMAA8GR7CJR4N-XN) use a 2Rx4 design tailored for Xeon Scalable architectures. Meanwhile, the 32GB dual-module kit (model ROMED8-2T) features a 2Rx8 structure to match specific dual-channel server boards.
What is the difference between single-module Nemix options and multi-module kits?
Single modules provide an isolated capacity upgrade, while multi-module kits populate multiple memory channels simultaneously for balanced bandwidth. Nemix offers single sticks like the 64GB DDR4-3200 ECC RDIMM alongside multi-module packages such as 2x16GB, 4x16GB, 6x32GB, and 8x32GB. Multi-module configurations allow compatible server or workstation boards to take immediate advantage of dual-channel, quad-channel, or six-channel memory bus routing.