6 Best Alternatives to the SP Silicon Power Silicon Power Value Gaming (2026)

Comparing the Alternative Memory Kits

G.SKILL Ripjaws V 16GB (2x8GB) 3200MHz DDR4 RAM

The G.SKILL Ripjaws V kit provides 16GB of DDR4 memory across two 8GB sticks, whereas the SP Silicon Power kit gives you 32GB across two 16GB sticks. Both options run at 3200MHz with CL16 latency and 1.35V on desktop motherboards supporting Intel XMP. Choosing this G.SKILL kit means you give up half of the total system memory capacity. You also need to plan for cooler clearance, as its heat spreaders measure 1.73 inches tall compared to 1.46 inches on the Silicon Power modules. Pick this kit if you only need 16GB for everyday gaming and have clearance for taller heatsinks.

G.SKILL Ripjaws V 16GB DDR4 3200MHz UDIMM

This G.SKILL Ripjaws V option delivers 16GB on a single module, while the Silicon Power Value Gaming kit provides 32GB split across two 16GB sticks. Both share 3200MHz speeds, CL16 latency, and 1.35V requirements for desktop systems. The single-stick configuration leaves open memory slots on your motherboard, making it easier to install additional modules later without removing existing RAM. However, you give up half the total memory out of the box and miss out on dual-channel memory bandwidth until you add a second matching stick. Choose this module if you want a basic 16GB starting point that keeps your remaining desktop DIMM slots open for future upgrades.

G.SKILL Ripjaws V 64GB DDR4 3200MHz RAM

The G.SKILL Ripjaws V 64GB kit doubles the memory capacity of the 32GB Silicon Power kit by providing four matched modules. Both kits feature identical 3200MHz operational frequency, CL16 latency, and 1.35V power ratings. A distinct physical advantage of this G.SKILL kit is its compact 0.39-inch height, making it significantly lower in profile than the 1.46-inch Silicon Power heat spreaders for easier installation beneath large air coolers. The tradeoff is that using four modules fills all four DIMM slots on standard motherboards, leaving no room for further memory expansion. Pick this 64GB kit if you run demanding content creation or multitasking workloads that benefit from maximum desktop capacity.

G.SKILL Ripjaws V 16GB (2x8GB) DDR4 3200MHz

This version of the G.SKILL Ripjaws V comes in red and provides a 16GB capacity using two 8GB sticks. In contrast, the Silicon Power kit delivers 32GB using two 16GB sticks with camouflage grey styling. Both kits share the same 3200MHz clock speed, CL16 latency, and 1.35V operating voltage. The main physical distinction is the ultra-low 0.17-inch height of these G.SKILL modules compared to the 1.46-inch height of the Silicon Power heat sinks, offering significantly better vertical clearance under tight desktop CPU coolers. You sacrifice 16GB of capacity compared to the original kit. Pick this kit if your build has restrictive cooler clearance or a red color theme and 16GB meets your performance needs.

The G.SKILL Trident Z RGB 16GB kit adds integrated RGB lighting across its heat spreaders, differing from the standard camouflage grey aluminum heat sinks on the Silicon Power kit. Both kits share 3200MHz speeds, CL16 latency, and 1.35V operation. With two 8GB sticks, this G.SKILL option provides 16GB total memory, which is half the 32GB capacity of the Silicon Power set. At 1.73 inches tall, these Trident Z modules also require more vertical space inside your case than the 1.46-inch Silicon Power modules. Choose this Trident Z kit if you want customizable RGB illumination for a gaming setup and your computing needs do not exceed 16GB of system memory.

The G.SKILL Trident Z RGB 32GB kit matches the Silicon Power Value Gaming kit in core technical specifications, offering 32GB across two 16GB modules at 3200MHz, CL16 latency, and 1.35V. The primary addition here is the integrated RGB lighting on the heat spreaders compared to the plain grey aluminum heat sink of the Silicon Power memory. However, the Trident Z modules measure 1.73 inches tall, compared to 1.46 inches for the Silicon Power kit. That extra height reduces clearance beneath bulky desktop CPU coolers. Pick this G.SKILL kit if you want the exact same 32GB capacity and 3200MHz speed as the original but prefer integrated RGB lighting and have clearance for taller modules.

Quick picks

Our 7 picks

1 Best overall

SP Silicon Power Value Gaming 32GB DDR4 3200MHz Kit

Best for: dual-channel 32GB desktop DDR4 builds

Total Capacity

32GB

Memory Speed

3200MHz

CAS Latency

CL16

Voltage

1.35V

Module Configuration

2x16GB

Form Factor

UDIMM

View on Amazon: SP Silicon Power Value Gaming 32GB DDR4 3200MHz Kit Affiliate link

This SP Silicon Power Value Gaming kit gives you 32GB of DDR4 desktop memory across two 16GB modules. It operates at 3200MHz with CL16 latency and 16-18-18-38 timings at 1.35V using Intel XMP. Standing 1.46 inches tall with an aluminum heat sink, it fits standard 288-pin UDIMM slots. It suits you if you need a dual-channel 32GB setup for multitasking or standard desktop workloads without requiring RGB lighting.

Pros

• Dual-channel 32GB capacity across two 16GB modules
• CL16 latency with 16-18-18-38 timings at 3200MHz
• Includes an aluminum heat sink for thermal dissipation
• Intel XMP profile support for configured overclocking

Cons

• Requires enabling BIOS profiles to reach advertised 3200MHz speeds
• Lacks integrated RGB lighting on the Camouflage Grey model
• Height of 1.46 inches may limit clearance with tight CPU coolers

Good fit if

• You want a dual-channel 32GB DDR4 setup running at 3200MHz.
• You have a motherboard and processor that support Intel XMP.
• You prefer a non-RGB build with an aluminum heat sink.

Skip if

• You want integrated RGB lighting on your memory modules.
• You need default plug-and-play 3200MHz speeds without entering BIOS.

Verdict: SP Silicon Power Value Gaming 32GB DDR4-3200 RAM provides 32GB of dual-channel capacity with CL16 latency and an aluminum heat sink. It offers solid desktop memory performance when configured with supported Intel XMP systems.

2 Best budget

G.SKILL Ripjaws V 16GB (2x8GB) 3200MHz DDR4 RAM

Best for: dual-channel DDR4 desktop gaming builds

Total Capacity

16GB

Memory Speed

3200MT/s

CAS Latency

CL16

Voltage

1.35V

Module Configuration

2x8GB

Form Factor

U-DIMM

View on Amazon: G.SKILL Ripjaws V 16GB (2x8GB) 3200MHz DDR4 RAM Affiliate link

This G.SKILL Ripjaws V kit provides 16GB of DDR4 memory across two 8GB modules. It runs at up to 3200MT/s with CL16-18-18-38 timings at 1.35V through an Intel XMP profile. The modules use standard 288-pin non-ECC desktop UDIMM slots and stand 1.73 inches tall. It fits your build if you want a dual-channel memory setup for gaming or everyday desktop computing.

Pros

• Rated for up to 3200MT/s with Intel XMP profile
• CL16 latency with 16-18-18-38 timing profile at 1.35V
• Two 8GB modules configured for dual-channel operation
• Standard 288-pin desktop DDR4 UDIMM form factor

Cons

• Boots at default JEDEC SPD speed until configured in BIOS
• Module height of 1.73 inches may interfere with large air coolers
• Non-ECC design lacks hardware error correction

Good fit if

• You want a 16GB dual-channel setup using two 8GB sticks.
• You have a desktop system that supports 288-pin DDR4 UDIMMs.
• You plan to enable Intel XMP in BIOS for 3200MT/s operation.

Skip if

• You need error-correcting code (ECC) memory for a workstation.
• You need more than 16GB of total system RAM.
• You have tight CPU cooler clearance below 1.73 inches.

Verdict: G.SKILL Ripjaws V 16GB DDR4-3200 Kit delivers CL16 timings at 3200MT/s in a two-module configuration. It provides a standard DDR4 option for compatible desktop motherboards supporting Intel XMP.

3 Best premium

G.SKILL RipjawsV 64GB DDR4 Kit

Best for: High-capacity desktop builds requiring 64GB

Total Capacity

64GB

Memory Speed

3200MT/s

CAS Latency

CL16

Voltage

1.35V

Module Configuration

4x16GB

Form Factor

U-DIMM

View on Amazon: G.SKILL RipjawsV 64GB DDR4 Kit Affiliate link

This G.SKILL RipjawsV kit offers 64GB of DDR4 memory across four 16GB modules. It runs at 3200MHz with CL16 latency and 1.35V voltage. The black U-DIMM sticks include an Intel XMP profile for easy overclocking. You get a high-capacity solution for desktop PCs. This kit suits users needing maximum RAM for heavy multitasking or content creation.

Pros

• 64GB total capacity in a 4x16GB configuration
• 3200MHz speed with CL16 latency
• Includes Intel XMP memory overclock profile
• Non-ECC DDR4 U-DIMM form factor

Cons

• Requires four motherboard slots, limiting future expansion
• Heavier build at 6.35 ounces compared to dual-channel kits
• Higher voltage requirement of 1.35V

Good fit if

• You need 64GB of RAM for professional workloads
• You have a motherboard with four DIMM slots
• You want a matched kit for stability

Skip if

• You only have two available RAM slots
• You are building a compact small-form-factor PC
• You prefer lower voltage operation at 1.2V

Verdict: G.SKILL RipjawsV 64GB DDR4 3200MHz provides massive capacity for power users. It fits best in desktops with four available slots and demanding memory needs.

4 Also great

G.SKILL RipjawsV 32GB DDR4 3200MHz

Best for: Users needing 32GB capacity with CL16 speed

Total Capacity

32GB

Memory Speed

3200MT/s

CAS Latency

CL16

Voltage

1.35V

Module Configuration

2x16GB

Form Factor

U-DIMM

View on Amazon: G.SKILL RipjawsV 32GB DDR4 3200MHz Affiliate link

This G.SKILL RipjawsV kit gives you 32GB of DDR4 memory in a 2x16GB configuration. It runs at 3200MHz with CL16 latency at 1.35V. The module includes an Intel XMP profile for easy speed adjustments. You get a black heatspreader that fits standard desktop cases. This setup suits gamers or creators who need more capacity than the 16GB options on this list.

Pros

• 32GB total capacity (2x16GB modules)
• 3200MHz speed with CL16 latency
• Includes Intel XMP overclock profile
• 1.35V operating voltage

Cons

• Lower capacity than the 64GB kits available
• Requires BIOS adjustments for maximum speed
• Heavier and bulkier than single sticks

Good fit if

• You need 32GB of RAM for multitasking
• You want a 2-stick configuration for dual-channel performance
• You prefer the G.SKILL RipjawsV design

Skip if

• You only need 16GB of memory
• You are building a 4-stick 64GB system
• You want a kit with lower latency than CL16

Verdict: G.SKILL RipjawsV 32GB DDR4 3200MHz is a solid mid-tier option for users who need more memory than the standard 16GB kits. It offers a balanced speed and capacity ratio for desktop gaming and productivity.

5 Best 16gb

G.SKILL Ripjaws V 16GB DDR4 3200MHz UDIMM

Best for: single-stick 16GB desktop memory configurations

Total Capacity

16GB

Memory Speed

3200MT/s

CAS Latency

CL16

Voltage

1.35V

Module Configuration

1x16GB

Form Factor

U-DIMM

View on Amazon: G.SKILL Ripjaws V 16GB DDR4 3200MHz UDIMM Affiliate link

The G.SKILL Ripjaws V 16GB DDR4-3200 Single Module provides desktop memory running at 3200MT/s with CL16 latency at 1.35V. Unlike multi-module kits, this package contains a single 16GB 288-pin UDIMM. It supports Intel XMP profiles for overclocking adjustments alongside standard JEDEC defaults. This module suits your desktop build if you need 16GB of non-ECC system memory while keeping secondary RAM slots completely open for future motherboard expansion.

Pros

• Runs up to 3200MT/s with CL16-18-18-38 timings
• Features Intel XMP profile for BIOS overclocking
• Single 16GB stick leaves open slots for future upgrades
• Standard 1.35V operating voltage

Cons

• Single-module configuration operates in single-channel mode alone
• Reaching rated 3200MT/s requires manual BIOS or XMP configuration
• Non-ECC design provides no hardware error correction

Good fit if

• You need a single 16GB DDR4 module to preserve free motherboard slots.
• You have an Intel or AMD desktop motherboard supporting 3200MT/s XMP.

Skip if

• You want an out-of-the-box dual-channel two-stick memory kit.
• You need ECC memory for specialized workstations or servers.

Verdict: G.SKILL Ripjaws V 16GB DDR4-3200 Single Module is a practical choice if you want 16GB of CL16 desktop memory on a single stick. It gives you 3200MT/s speeds via Intel XMP while leaving remaining slots clear.

6 Best 64gb

G.SKILL Ripjaws V 64GB DDR4 3200MHz RAM

Best for: high-capacity multitasking and content creation builds

Total Capacity

64GB

Memory Speed

3200MT/s

CAS Latency

CL16

Voltage

1.35V

Module Configuration

4x16GB

Form Factor

U-DIMM

View on Amazon: G.SKILL Ripjaws V 64GB DDR4 3200MHz RAM Affiliate link

This G.SKILL Ripjaws V kit provides 64GB of DDR4 memory across four 16GB modules, operating at 3200MT/s with CL16-18-18-38 timings at 1.35V. It includes Intel XMP profiles for straightforward BIOS configuration on compatible desktop motherboards. If you run memory-intensive applications, heavy multitasking, or production workloads that demand significantly more memory than standard 16GB or 32GB kits, this quad-channel-ready configuration serves your needs.

Pros

• High 64GB total capacity across four matched 16GB modules
• Tested 3200MT/s speed with CL16-18-18-38 timings at 1.35V
• Pre-configured Intel XMP profile for BIOS overclocking
• Standard 288-pin desktop U-DIMM form factor

Cons

• Occupies four motherboard DIMM slots simultaneously
• Requires BIOS adjustments to run above default JEDEC speed
• Non-ECC design lacks workstation error correction

Good fit if

• You need 64GB of total system RAM for heavy workloads.
• You have a desktop motherboard with four open DDR4 memory slots.

Skip if

• You have a two-slot motherboard such as a Mini-ITX board.
• You require error-correcting ECC memory for enterprise systems.

Verdict: G.SKILL Ripjaws V 64GB 3200MHz DDR4 RAM provides substantial memory capacity and low CL16 latency for demanding desktop configurations. It is a solid choice when you need four matched modules to maximize your system memory.

7 Also great

G.SKILL Ripjaws V 16GB (2x8GB) DDR4 3200MHz

Best for: dual-channel DDR4 desktop gaming builds

Total Capacity

16GB

Memory Speed

3200MT/s

CAS Latency

CL16

Voltage

1.35V

Module Configuration

2x8GB

Form Factor

U-DIMM

View on Amazon: G.SKILL Ripjaws V 16GB (2x8GB) DDR4 3200MHz Affiliate link

This G.SKILL desktop memory kit gives you 16GB of DDR4 memory across two 8GB modules. It runs at up to 3200MT/s with CL16-18-18-38 timings at 1.35V using Intel XMP. Standard boots default to basic JEDEC speeds until you configure the profile. This two-stick setup suits you if you want dual-channel 3200MHz bandwidth for everyday desktop gaming without excess memory capacity.

Pros

• Dual-channel 16GB configuration split across two matched 8GB sticks
• Runs at 3200MT/s with CL16-18-18-38 timings using Intel XMP
• Standard 288-pin U-DIMM form factor fits Intel and AMD desktop motherboards
• Tested 1.35V operating voltage for overclock profile stability

Cons

• Requires manual BIOS adjustments to reach the advertised 3200MT/s speed
• Non-ECC design lacks hardware error correction
• Total 16GB capacity limits headroom for memory-intensive workstation workloads

Good fit if

• You want a dual-channel 16GB DDR4 configuration for your desktop PC.
• You have an Intel or AMD motherboard that supports Intel XMP profiles.
• You target 3200MT/s transfer speeds with CL16 latency.

Skip if

• You need 32GB or more memory for heavy productivity workloads.
• You require ECC memory for specialized workstation or server stability.
• You want 3200MT/s speeds without configuring BIOS settings.

Verdict: G.SKILL Ripjaws V 16GB (2x8GB) DDR4-3200 RAM delivers balanced dual-channel bandwidth and CL16 latency for desktop systems. It provides reliable everyday performance once you enable its Intel XMP profile.

Specifications side by side

Frequently asked questions

See also

• sp silicon power silicon power 1tb alternatives
• glorious gaming alternatives